Belt Drive Systems
10,000+ SKUs across 8 categories. CAT · Komatsu · Hitachi · Volvo · Hyundai and more. MOQ 1 piece.
Belt Drive Systems
338 items
Belt Drive Systems
Engine Grade Fan Belt 6718730 – Fits Bobcat Skid Steer Loaders
<p><strong>Engine Fan Belt 6718730 (cross-reference), EPDM V-Profile</strong> — compatible with Bobcat S150, S160, S175, S185, S205, T180, T190, 5600, 773 skid steer loaders.</p> <p>This belt drives the engine cooling system. When heat management faults recur after belt replacement, inspect tensioner, pulley alignment, and fan assembly together — matched cooling drive components prevent repeat failures.</p> <ul> <li>High-modulus polyester cords retain tension under sustained high-RPM operation</li> <li>Molded V-profile matches pulley groove geometry for uniform contact pressure</li> <li>ISO 9001 and SAE J1459 compliant</li> </ul> <p>Matched belt, tensioner, and pulley sets ship as one consignment for complete cooling drive refresh.</p>
Belt Drive Systems
V-Belt 9001A-96003 Replacement for Toyota 4Y Engine Powertrain
<p><strong>9001A-96003 V-Belt for Toyota 4Y Engine</strong> — chloroprene rubber compound with aramid cord reinforcement, engineered for accessory drive systems.</p> <ul> <li>Operates within the Toyota 4Y belt drive system alongside the alternator, water pump, and crankshaft pulley. Proper pitch length and dimensional tolerance prevent edge wear and harmonic flutter in dual-pulley configurations. Pair with matched tensioners and seals for a complete overhaul kit that addresses root-cause wear, not just the failed component.</li> <li>Fits 7FG, 8FG, and 7FGU/8FGU series forklifts across multiple serial ranges.</li> </ul> <p>Cross-reference part number verified against engine build records, with matched accessory drive components shipped together for system-level rebuilds.</p>
Belt Drive Systems
Belt 153263001 | Matched Set for Vermeer BC1000XL Chipper
<p><strong>Belt 153263001 — EPDM replacement for Vermeer BC1000XL Chipper, trapezoidal cross-section</strong> — transmits engine torque to the cutting drum within the power transmission system.</p> <ul> <li>EPDM compound with high-tensile polyester-cord reinforcement resists heat and abrasion in high-RPM chipping</li> <li>Dimensional tolerance held to ±0.3 mm for drop-in fit against pulley groove profile</li> <li>Inspect adjacent tensioners, pulleys, and bearings to address root cause of previous belt failure</li> </ul> <p>Matched drive-train components ship as one overhaul consignment, with system-level compatibility verified against your BC1000XL engine build.</p>
Belt Drive Systems
Drive Belt for Club Car Carryall & Precedent – Powertrain
<p><strong>105245801 Drive Belt for Club Car CVT Systems, Aramid Cord Reinforced</strong> — compatible with Carryall 300-900, Precedent, and Cafe Express utility vehicles.</p> <ul> <li>Chloroprene compound with aramid reinforcement for dimensional stability across –20°C to +80°C</li> <li>Precision-molded tooth geometry matched to CVT clutch sheave profiles to prevent slippage and chatter</li> </ul> <p>This belt operates within the CVT drive system; inspecting primary and secondary clutch wear before installation addresses root-cause failures rather than treating symptoms.</p> <p>Matched CVT service components ship together with verified fitment records.</p>
Belt Drive Systems
Transaxle Belt Replacement for Husqvarna Ariens System-Matched
<p><strong>587086101 Transaxle Variation Belt, Aramid Cord / EPDM Compound</strong> — replacement for Husqvarna and Ariens hydrostatic drive lawn tractors, cross-reference interchange 532426740, 580486301, GT37401.</p> <ul> <li>Part of the <strong>hydrostatic belt drive system</strong> — replace with matched tensioner and pulleys to avoid repeat slippage; aramid cords hold length under variable torque, EPDM withstands UV and –20°C to +90°C exposure.</li> <li>Trapezoidal profile ensures full sheave engagement and reduced edge wear across continuous mowing duty.</li> <li>Overhaul belt kit contents verified against transmission serial variant before dispatch.</li> </ul>
Belt Drive Systems
Belt Tensioner for New Holland T6080/T6090/T7.210 – Engine Grade
<p><strong>504315786, 504028028, 87803067 Belt Tensioner</strong> for New Holland T6080/T6090/T7.210 — high-silicon gray iron housing, sealed double-row angular contact roller bearing, ±2.5 N·m spring calibration. Compatible with F4DFE/F4HFE/F4GE engine families across B002–B008 build codes.</p> <ul> <li> <p>Critical to the front-end belt drive system — interacts with alternator, water pump, and AC compressor pulleys. Mismatched spring rate causes belt squeal, glazing, or premature bearing failure across adjacent components. Verify exact engine build code before ordering to match pivot geometry and calibration variant.</p> </li> <li> <p>Supplied as part of a matched front-end overhaul set with belts and idler pulleys for complete rebuild sequencing.</p> </li> </ul>
Belt Drive Systems
Main Pump Drive Belt 6667322 | Matched Set for Bobcat S175 S185
<p><strong>Main Pump Drive Belt 6667322 (cross-reference only), 3-groove cogged design with fiber-loaded backing</strong> — replacement for Bobcat S130, S175, S185, S205 and T140, T180, T190 skid steer loaders.</p> <ul> <li>Engineered as part of the complete belt drive system: matched tensioners, pulleys and fan belts should be verified together during engine overhaul to prevent premature re-failure.</li> <li>Cogged profile ensures consistent engagement with OEM pulley grooves while cord reinforcement resists thermal stretch under sustained hydraulic pump loads.</li> <li>Overhaul kit contents checked item by item before dispatch to match your engine serial variant.</li> </ul>
Belt Drive Systems
Ribbed V-Belt 01184002/04131488 for Deutz D2.9 TCD2.9 – Engine Grade
<p><strong>01184002/04131488 Ribbed V-Belt, EPDM compound with polyester cord reinforcement</strong> — compatible with Deutz D 2.9 L4, TD 2.9 L4, TCD 2.9 L4 and TCD 2.2 L3 engines. Part of the belt drive system powering alternator, water pump and fan; replacing the belt without inspecting tensioners and pulley alignment often causes repeat failure. EPDM formulation handles sustained operating temperatures up to 120°C per DIN 7753.</p> <ul> <li>Cross-reference: 01184002, 04131488 (reference only)</li> <li>Matched belt drive components available for complete system overhaul</li> </ul>
Belt Drive Systems
V-Belt 080109107 Replacement for Perkins 404C-22 Powertrain
<p><strong>V-Belt 080109107 Replacement for Perkins 404C-22 Engine Cooling System</strong> — chloroprene compound with polyester cord, precision-molded trapezoidal profile.</p> <ul> <li>Fits Perkins 404C-22, 404C-22T and 104-22 engines (cross-reference 080109107 / T80109107)</li> <li>Drives fan and water pump; inspect tensioner bearing and pulley alignment before fitting to address root cause</li> <li>Replace with thermostat and hoses as a matched cooling-system set during overhaul</li> </ul> <p>Overhaul kit contents verified item-by-item before dispatch.</p>
Belt Drive Systems
System-Matched Deck Belt Replacement for Toro Grandstand 52″
<p><strong>131-1122 Deck Belt for Toro Grandstand 52", Neoprene-Reinforced with Aramid Cords</strong> — replacement for Toro Grandstand 74505, 74519, 74529, and Multi Force 79505 mowers. This belt belongs to the engine belt drive system; inspect tensioners, idler pulleys, and pulley grooves before installation to address root causes of premature failure. Trapezoidal cross-section and micro-textured surface ensure full groove engagement under high-torque continuous load. Cross-reference 145-3482 verified against machine serial range.</p> <ul> <li>Overhaul kit contents verified item by item before dispatch</li> </ul>
Belt Drive Systems
Rebuild Kit Belt Compatible with Bobcat 753 763 773 7753
<p><strong>6660994 Belt — 3VX 3-groove V-belt, EPDM + aramid reinforced</strong> for Bobcat 753, 763, 773, 7753 skid steer loaders.</p> <ul> <li>Replaces pump drive belt in engine-driven hydraulic accessory systems; install as a matched set during engine or hydraulic pump overhaul to maintain correct tension and prevent cavitation.</li> <li>Aramid reinforcement limits elongation under peak hydraulic load, while EPDM compound resists heat soak from adjacent exhaust and turbo components.</li> </ul> <p>Dimensions verified to ±0.3 mm tolerance — overhaul kit contents item-checked before dispatch. (Record 10882)</p>
Belt Drive Systems
System-Matched V-Belt 130-0843 – Fits Toro TimeCutter
<p><strong>130-0843 Deck V-Belt, 54-inch A-Section</strong> — compatible with Toro TimeCutter and Exmark Quest 54" deck zero-turn mowers.</p> <ul> <li>Engineered for the <strong>deck power transmission system</strong>, transferring engine output to spindles under high-torque, high-RPM conditions</li> <li>Polyester-cord reinforcement maintains dimensional stability and minimizes stretch across extended mowing cycles</li> <li>Matched to original pulley groove geometry for proper seating, friction transfer, and reduced heat buildup</li> </ul> <p>Complete matched belt sets ship together for consistent system-level rebuilds.</p>