Recoil Starter
10,000+ SKUs across 8 categories. CAT · Komatsu · Hitachi · Volvo · Hyundai and more. MOQ 1 piece.
Recoil Starter
18 items
Engine Auxiliary Components
Engine Grade Recoil Pull Starter for Stihl MS194T – System-Matched
<p><strong>1137-080-2115 Recoil Starter</strong> — replacement for Stihl MS194T small-engine auxiliary system, reinforced PA66+GF25 housing with DIN 17224 C75S heat-treated spring steel.</p> <ul> <li>Functions as the ignition entry point within the engine auxiliary group alongside spark plugs, fuel lines, and carburetor seals — matched component supply ensures the full starting system is addressed</li> <li>Pairing with air filters and gasket sets in one consignment eliminates partial-kit delays during fleet overhauls</li> </ul> <p>Overhaul kit contents verified item-by-item against your MS194T build variant before dispatch.</p>
Engine Auxiliary Components
System-Matched Recoil Starter 576594001 – Fits RedMax EBZ Series
<p>Overhaul kit contents verified item by item against your specific engine build record before shipment.</p>
Engine Auxiliary Components
Recoil Starter 1137-080-2115 Replacement for Stihl MS194T Powertrain
<p><strong>Recoil Starter 1137-080-2115</strong> — replacement for Stihl MS194T chainsaw, PA66 housing with 30% glass fiber, 3.2 mm braided nylon rope rated at 120 kg tensile load.</p> <p>Part of the engine auxiliary system, this starter ensures reliable cranking torque during post-rebuild startup and daily operation. Mounting dimensions held to ±0.15 mm tolerance prevent interference with flywheel and clutch assembly, while the high-carbon steel spring sustains consistent recoil force across 5,000+ pull cycles.</p> <ul> <li>Cross-reference: 1137 080 2115, 1137-084-1002</li> <li>Overhaul kit contents and matched components verified before dispatch</li> </ul>
Engine Auxiliary Components
System-Matched Recoil Starter 576594001 – Fits RedMax EBZ6500 EBZ8500 EBZ8560
<p><strong>Recoil Starter 576594001 — Engine Auxiliary Replacement for RedMax EBZ6500, EBZ8500, EBZ8560 Blowers</strong>, glass-filled polypropylene housing with ASTM A228 spring steel and sealed 608ZZ bearings.</p> <ul> <li>Belongs to the engine auxiliary system; inspect pulley bearings, clutch engagement, and cord guide wear during replacement to address root-cause failures rather than repeating starter-only swaps</li> <li>Pull-force calibrated to 22–28 N·m with rewind cycle validation ≥5,000 cycles for consistent cold-start reliability across temperature ranges</li> <li>Fits RedMax EBZ6500, EBZ7500, EBZ8500, EBZ8550, EBZ8560 series including RH variants (cross-reference: 576594001)</li> </ul> <p>Matched auxiliary components ship together with overhaul kit contents verified item by item.</p>
Engine Auxiliary Components
System-Matched Recoil Rewind Pull Starter Assembly 150-481 695058 for Briggs & Stratton
<p><strong>Recoil Starter 150-481 695058, 15.5–17.5HP, high-carbon steel spring</strong> — compatible with Briggs & Stratton engines including models 212902-0127-E1, 215707-0117-E1, 215802-0118-B1 and other listed serial variants.</p> <p>This recoil starter belongs to the engine auxiliary system, where matched replacement with spark plugs, air filters and fuel line components avoids re-opening the shroud. Pulley hub concentricity (±0.05 mm) and 5,000+ pull-cycle endurance ensure reliable rewind performance across repeated cold starts.</p> <ul> <li>System-level auxiliary kits ship matched for full starting circuit service</li> <li>Engine rebuild shops order matched sets for consistent Briggs & Stratton platform coverage</li> </ul>
Engine Auxiliary Components
MTX60 MTX70-Compatible Recoil Starter – Overhaul Component
<p><strong>28400Z0DV04ZA Recoil Starter</strong> – replacement for MTX60, MTX70 and GX100-powered rammers, PA66-GF30 housing with EPDM sealing gasket.</p> <ul> <li>Belongs to the engine auxiliary system; inspect flywheel teeth, starter pawl and recoil spring condition during GX100 overhaul to address root-cause faults rather than symptoms alone</li> <li>Matched auxiliary kits available for complete rammer engine rebuilds with verified cross-reference coverage (28400-Z0D-V04ZA, 28400-Z0D-V04Z)</li> </ul> <p>Overhaul kit contents verified item-by-item before dispatch under ISO 9001 production and 6-month warranty.</p>
Engine Auxiliary Components
Engine Grade Recoil Pull Starter 1137-080-2115 for Stihl MS194T Chainsaw
<p><strong>1137-080-2115 Recoil Pull Starter for Stihl MS194T Chainsaw</strong> — new aftermarket engine starting system component with ISO 9001 factory certification.</p> <ul> <li>Replacing the recoil starter on handheld chainsaws requires checking internal spring fatigue, rope condition, and pulley engagement wear — addressing only the failed part without inspecting the full starting system leads to repeat breakdowns. Cross-reference 1137-084-1002 series to confirm correct variant for your engine serial range.</li> <li>Complete matched starting-system components ship together with rebuild-grade verification for each production run.</li> </ul>
Engine Auxiliary Components
Recoil Starter 576594001 | Matched Set for RedMax EBZ6500 EBZ8500
<p><strong>Recoil Starter 576594001, reinforced nylon housing with high-tensile spring</strong> — compatible with RedMax EBZ6500, EBZ7500, EBZ8500 and RH variants for engine starting system rebuild.</p> <ul> <li>Inspect flywheel ring gear teeth and pawl engagement surface when replacing; mismatched pawl geometry or worn flywheel serrations cause repeated recoil failure even with a new assembly</li> <li>Verify engine suffix (RH vs. non-RH) and pawl tooth count against flywheel profile before ordering to ensure correct meshing and pull resistance</li> <li>Matched components ship together with overhaul-grade dimensional verification per rebuild history.</li> </ul>
Engine Auxiliary Components
Engine Grade Recoil Rewind Pull Starter Assembly 150-481 695058
<p><strong>Recoil Starter Assembly 150-481 695058 for Briggs & Stratton 15.5-17.5HP Engines</strong> — ISO-certified aftermarket replacement addressing the engine starting system as a complete service line.</p> <ul> <li>Replacing a failed pull starter often reveals a sheared flywheel key or frayed rope; this assembly ships with matched rope specification to eliminate field measurement errors during overhaul</li> <li>Engine serial variants affect recoil housing mounting pattern and fastener thread size — cross-reference confirmed against 30+ applicable serial numbers before dispatch</li> </ul> <p>Sample fitment available before bulk commitment for your rebuild shop's first unit verification.</p>
Engine Auxiliary Components
Recoil Starter 28400Z0DV04ZA | Engine Grade for MTX60 MTX70
<p><strong>Recoil Starter 28400Z0DV04ZA</strong>, engine auxiliary component with heat-treated spring mechanism and impact-resistant housing — compatible with <strong>Multiquip Mikasa MTX60, MTX70, MTX70HD, GX100</strong> rammers.</p> <ul> <li>Belongs to the engine ignition system; matched engagement with flywheel pawl and ratchet assembly ensures reliable cold starts after rebuild</li> <li>Cross-reference verified across superseded numbers (28400-Z0D-V04ZA, 28400-Z0D-V04Z) to prevent variant mismatch</li> <li>Spring tension and cord retraction validated as part of system-level engine testing before dispatch</li> </ul> <p>Complete overhaul kits and auxiliary components ship matched to your engine serial variant.</p>
Engine Auxiliary Components
Engine Grade Recoil Pull Starter 1137-080-2115 1137-084-1002 for Stihl Chainsaw MS194T
<p><strong>1137-080-2115 1137-084-1002 Recoil Pull Starter for Stihl MS194T Chainsaw</strong> — new aftermarket unit compatible with Stihl MS194T engine auxiliary system, complete assembly with high-impact polymer housing and heat-treated steel spring mechanism.</p> <ul> <li>Supplied as a fully assembled unit including internal spring and housing, supporting matched engine system rebuilds and eliminating partial-fit issues</li> <li>Addresses root causes such as flywheel engagement faults or improper cord routing within the auxiliary system</li> <li>Cross-reference OEM numbers (1137-080-2115 / 1137-084-1002) verified for applicable engine serial variants</li> <li>Overhaul kit contents checked item by item before dispatch to ensure all auxiliary components match your engine build</li> </ul>
Engine Auxiliary Components
Recoil Starter Assembly 576594001 – Engine Grade for RedMax EBZ6500
<p><strong>576594001 Recoil Starter Assembly, high-tensile steel spring</strong> — compatible with RedMax EBZ6500, EBZ7500, EBZ8500, EBZ8550, and EBZ8560 series blowers as an engine auxiliary replacement. Belongs to the engine ignition system; inspect flywheel engagement surface and mounting bolts for wear that may share the same failure root cause. Matched auxiliary components available for complete system restoration during rebuild.</p> <ul> <li>Condition: New Aftermarket, ISO 9001 sourced</li> <li>Fitment verification by engine serial number before dispatch</li> <li>Overhaul kit contents checked item-by-item for your specific engine build</li> </ul>