Cylinder Head
10,000+ SKUs across 8 categories. CAT · Komatsu · Hitachi · Volvo · Hyundai and more. MOQ 1 piece.
Cylinder Head
55 items
Cylinder Components
Cylinder Head Gasket Kit Replacement for Kubota D782 System-Matched
<p>Overhaul kit contents cross-checked against your specific D782 build history before shipment.</p>
Cylinder Components
Engine Grade V1505 Cylinder Head Compatible with Kubota B3200
<p><strong>16060-03044 Cylinder Head for Kubota V1505 Engine, Complete Assembly with Valves & Springs</strong> — compatible with B3200HSD, B3030HSDC, KX71-3 and related models. This head belongs to the combustion sealing and valvetrain system; pre-installed valves and guides eliminate clearance mismatch risk during overhaul. Verify engine serial variant (V1505-E3B, V1505-T-E3B, V1505-E4B) to confirm port and valve geometry match. Matched set supplied for consistent rebuild tolerances.</p>
Cylinder Components
D1005 Cylinder Head for Kubota ZD25 ZD28 L4240 – Engine Grade Rebuild Component
<p><strong>D1005 Cylinder Head for Kubota ZD25, ZD28, L4240</strong> — complete assembly with valves and springs, high-silicon aluminum alloy casting, Ra ≤ 1.6 μm deck finish.</p> <ul> <li>Supplied fully assembled to reduce rebuild bench time — pair with matching head gasket, valve stem seals, and head bolts from the same order for system-level overhaul accuracy.</li> <li>Confirm engine serial variant (D1005-E3 / D1005-E4) before ordering, as internal dimensions differ across designations.</li> <li>Overhaul kit contents verified item-by-item against your engine build record before dispatch.</li> </ul>
Cylinder Components
Rebuild Kit Cylinder Head Compatible with CAT 3044C C3.4 Engine
<p><strong>179-1854 233-5500 Complete Cylinder Head with Valves</strong> — cast aluminum alloy, ≤0.05 mm sealing surface flatness, compatible with CAT 3044C, C3.4, and C3.4 IND engines in skid steer and loader models including 277C, 287C, 262C, and 908H.</p> <ul> <li>Supplied with valves and springs pre-assembled for matched valvetrain tolerances across the head-to-block interface</li> <li>Verify block deck machining history and select correct head gasket grade before torque-down to prevent repeat failure</li> <li>Overhaul kit contents including gaskets and head bolts reviewed item-by-item before dispatch</li> </ul>
Cylinder Components
Cylinder Head 6655153 7327327 for Kubota V2203 – Overhaul Component
<p><strong>Cylinder Head 6655153 7327327 for Kubota V2203, ASTM A48 Class 30 gray iron, 150 psi pressure tested</strong> — replacement for Bobcat S175, 7753, 341 skid steers and compact equipment.</p> <ul> <li>Sits at the top of the V2203 combustion system; verify valve seat grade, head gasket thickness, and block deck condition before assembly to avoid compression loss</li> <li>Match this cylinder head with the correct overhaul gasket set, head bolts, and valve stem seals so the top-end rebuild goes together in one pass</li> <li>Overhaul gasket kit contents verified line-by-line against your specific V2203 build configuration before dispatch</li> </ul>
Cylinder Components
Complete Cylinder Head for Kubota V2203 Engine – Engine Grade
<p><strong>6686996 7327333 Cylinder Head, Complete with Valves & Springs</strong> — compatible with Kubota V2203 and V2203 2EB (Tier II) engines for Bobcat 753, 763, S175, 331 and more.</p> <ul> <li>Supplied as a matched top-end component with deck face flatness verified, supporting overhaul sequencing without separate valvetrain sourcing</li> <li>Cross-reference interchange 6686996 / 7327333 — confirm engine serial variant before ordering</li> <li>Overhaul kit contents verified item by item for system-matched rebuild supply</li> </ul>
Cylinder Components
Cylinder Head Replacement for Kubota V3300 Tractor Overhaul Component
<p><strong>1G545-0302-8 Cylinder Head for Kubota V3300 series engines</strong> — replacement for M8200, M9000 tractors, high-silicon aluminum alloy casting. Belongs to the V3300 combustion system where matched head gaskets, valve stem seals, and torque-to-yield head bolts must be installed together during overhaul to prevent deck sealing failures. - Covers DI, DI-T, and E2B/E3BG sub-models with verified port geometry and induction-hardened valve seats. Overhaul gasket kit and bolt set available for matched supply in one consignment.</p>
Cylinder Components
Complete Cylinder Head With Valves and Springs for Kubota V2403 – Engine Grade
<p><strong>1G855-03042B, 1G916-03040B, 1G780-03043B Cylinder Head for Kubota V2403</strong>, complete with valves and springs pre-installed.</p> <ul> <li>Fits <strong>Kubota V2403, V2403-M-DI, V2403-CR</strong> engine variants in excavators, tractors, and generators</li> <li>Induction-hardened valve seats (45–48 HRC) and deck flatness ≤0.05 mm ensure combustion sealing integrity across rebuild cycles</li> <li>Matched valve train tolerances (stem ±0.005 mm, spring rate 280 N/mm) eliminate piecemeal sourcing mismatch</li> <li>Hydraulic tested at 150 psi for 10 min before dispatch</li> </ul> <p>Overhaul gasket kit contents verified against head assembly for complete top-end rebuild — matched sets ship together.</p>
Cylinder Components
D902-Compatible Complete Cylinder Head – Overhaul Component
<p><strong>1G962-03042 Complete Cylinder Head with MLS Gasket Kit for Kubota D902 Engine Overhaul</strong></p> <ul> <li>Fits D902, D902-E2B, D902-E3B, D902-E4B variants in Kubota BX23S, KX41-3, ZD323 and compatible machines</li> <li><strong>Gray cast iron (ASTM A48 Class 30)</strong> deck surface at Ra ≤ 1.6 μm ensures uniform MLS gasket compression</li> <li>Valve seat inserts hardened to 45–48 HRC for sustained high-temperature combustion sealing</li> <li>Coolant passages flow-tested at 1.2 bar to verify casting integrity before dispatch</li> </ul> <p>Overhaul kit contents cross-checked against D902 variant specs so matched head, gasket and fastener components ship together for rebuild sequencing.</p>
Cylinder Components
Complete Cylinder Head Replacement for Kubota V2003 V2203 V2403 Engine Grade
<p><strong>Complete Cylinder Head for Kubota V2003 V2203 V2403</strong> — HT250 gray cast iron, supplied assembled with matched valves and springs.</p> <ul> <li>Designed for the valve train system of Kubota V-series diesel engines, with induction-hardened seats to handle high-compression intermittent loads</li> <li>Sealing surfaces ground to Ra ≤1.6 μm for proper head gasket interface during overhaul</li> <li>Matched spring load and installed height eliminate tolerance mixing between reused and new components</li> </ul> <p>Overhaul kit contents verified item-by-item against your engine build sheet before dispatch.</p>
Cylinder Components
Engine Grade D902 Cylinder Head – Fits Kubota D902 Engine
<p><strong>D902 Cylinder Head — High-silicon aluminum alloy, Ra ≤ 1.6 μm machined surface</strong> — compatible with Kubota D902, D902-E2B, D902-E3B, and D902-E4B engine variants.</p> <ul> <li>Pairs with matched head gasket, valve stem seals, and glow plugs to maintain 22.5:1 compression ratio across the combustion system</li> <li>Combustion chamber volume tolerance held to ±1.2 cc for consistent cylinder-to-cylinder balance during overhaul</li> </ul> <p>Rebuild grade confirmed against prior machining history and oversize requirements before dispatch.</p>
Cylinder Components
Engine Grade Cylinder Head and Gasket Kit – Fits D902
<p><strong>1G687-03022 Cylinder Head and Gasket Kit, ASTM A48 Class 35 Cast Iron</strong> — compatible with Kubota D902, D902-E2B, D902-E3B, and D902-E4B engine variants. Supplied as a matched top-end set with multi-layer steel head gasket and Viton-coated sealing beads, addressing coolant and oil passage alignment for D902 rebuilds. Deck surface ground to ≤0.05 mm flatness to resolve repeat gasket failure causes. - Full gasket kit contents verified against your specific D902 serial configuration before dispatch</p>