OUR PRODUCTS
10,000+ SKUs across 8 categories. CAT · Komatsu · Hitachi · Volvo · Hyundai and more. MOQ 1 piece.
All Products
1394 items
Belt Drive Systems
Wheel Tensioner 7167165 for Bobcat Skid Steer Loaders – Overhaul Component
<p><strong>Wheel Tensioner 7167165 for Bobcat Skid Steer Loaders</strong> — replacement for Bobcat A770, S510, S530, S550, S570, S590, S630, S650, S750, S770, S850, T550, T590, T630, T650, T750, T770, T870 models. Features forged carbon steel housing with zinc-nickel plating for 720-hour salt-spray resistance, ±0.15 mm dimensional tolerance, and ±3% spring force stability across -20°C to +70°C operating range.</p> <p>This undercarriage track tensioner maintains proper chain tension between idler and sprocket, reducing parasitic engine load and preventing asymmetric wear on track shoes and link bushings. Inspect idler bearings and drive sprocket concurrently when replacing tensioner to avoid repeat failures from residual system wear.</p> <p>Dimensional inspection record covering pivot pin, bushing clearance, and mounting pattern included with shipment.</p>
Emission & Exhaust System
System-Matched S200 Turbocharger RE508719 for John Deere 4045 6068
<p><strong>S200 Turbocharger RE508719 — Ni-resist ductile iron turbine housing, forged 7075-T6 aluminum compressor wheel</strong> for John Deere 4045 and 6068 engines.</p> <ul> <li>Cross-reference RE508719 interchange number fits excavators, loaders, and harvesters in sustained full-load cycles</li> <li>Replace as part of a matched intake and exhaust system set: inspect oil supply lines, drain circuits, intake manifold gaskets, and air filter elements to address root-cause failure</li> <li>Verify engine serial suffix (e.g., 6068HF258, 4045TF250) for correct port orientation and oil line routing before ordering</li> </ul> <p>Overhaul kit contents cross-checked against your engine build record before dispatch.</p>
Emission & Exhaust System
RHF4 Turbocharger 513-6823 for CAT 3024C – Engine Grade
<p><strong>RHF4 Turbocharger 513-6823 for CAT C2.2 & 3024C engines</strong> — replacement turbocharger (cross-reference 513-6823, CA317-0981) for skid steer loaders 216B through 257B.</p> <ul> <li>Fits emission and exhaust system overhaul — matched gaskets, oil feed lines, and exhaust manifold seals available as a complete set to prevent repeat turbo failure from upstream root causes.</li> <li>Engine serial number confirmation ensures correct mounting variant across C2.2 and 3024C production runs.</li> </ul> <p>Overhaul gasket and seal contents verified item-by-item before dispatch.</p>
Emission & Exhaust System
RHF3H Turbocharger 7000677/7020831 | Matched Set for Kubota V2607-DI
<p><strong>RHF3H Turbocharger 7000677/7020831 (cross-reference only), Ni-Resist D5S turbine housing</strong> — compatible with Kubota V2607-DI/V2607T engines and Bobcat S/T series skid steers. This turbo sits within the intake and boost system; a single failure often traces to upstream oil contamination or restricted drain lines, so matched gaskets, oil feed seals, and air filter elements should be renewed together to prevent repeat damage. Pre-shipment bench testing covers boost pressure, rotational balance, and oil seal integrity at 120,000 rpm.</p> <ul> <li>Overhaul kit contents and matched component sets verified item-by-item before dispatch</li> </ul>
Emission & Exhaust System
CAT C3.8-Compatible Turbocharger 482-8480 – Overhaul Component
<p><strong>482-8480 Turbocharger for CAT C3.8 Engine, New Aftermarket</strong> — replacement for skid steer and compact track loaders including 272D2, 299D3, and XHP variants. This turbocharger sits within the C3.8 intake and exhaust system, interacting directly with EGR and aftertreatment components — oil feed line condition and crankcase ventilation must be verified during fitting to prevent repeat CHRA failure. Compressor housing inlet geometry is matched to C3.8 airflow profiles for correct air-fuel ratio across the operating range. Overhaul kit contents and matched seal specifications are verified item-by-item before dispatch.</p>
Emission & Exhaust System
Rebuild Kit Turbocharger 3804566 Compatible with Komatsu PC600-6
<p><strong>Rebuild Kit Turbocharger 3804566, HT60-N0881A/H32K1 Model for Cummins N14</strong> — replacement for Komatsu PC600-6 and PC650-6 excavator emission and exhaust systems.</p> <ul> <li>Dual ceramic ball bearings rated to 180°C with Ni-Resist D5S ductile iron turbine housing sustain high-temperature exhaust cycles during heavy digging and sustained high-torque output.</li> <li>Matched with overhaul gaskets, seal kits, and oil feed line components to address the full intake-to-exhaust path in one rebuild cycle.</li> </ul> <p>Overhaul kit contents verified item-by-item against your N14 engine serial variant before dispatch.</p>
Emission & Exhaust System
RHF5 Turbocharger 898185-1951 for Isuzu 4JJ1X – Overhaul Component
<p><strong>RHF5 Turbocharger 898185-1951, Isuzu 4JJ1X Emission & Exhaust System</strong> — replacement for Hitachi ZX110-3, ZX120-3, ZX130-3, ZX135US-3 and John Deere 135D equipment.</p> <p>This turbocharger belongs to the 4JJ1X exhaust and boost system; pairing it with matched oil feed gaskets, drain flange seals, and air filtration components prevents repeat failure from oil coking or dust ingestion. Engine serial verification ensures correct port orientation across variant builds.</p> <p>Overhaul kit contents and mating gasket list verified against your engine serial before dispatch.</p>
Emission & Exhaust System
Rebuild Kit HX40 Turbocharger Compatible with Cummins 6BTA 5.9
<p><strong>3536620, 3536621, 3536621H, 3802829, 380282900, 3802829NX, 3802829RX, 4089816 HX40 Turbocharger</strong> compatible with Cummins 6BTA 5.9, 6BTAM, and 6B5.9 engines (1995–2006), featuring forged 7075-T6 aluminum compressor wheel and dual ceramic ball bearings for marine and industrial power units.</p> <ul> <li>Operates within the intake and exhaust loop where boost pressure up to 2.4 bar and EGT up to 720°C interact directly with fuel delivery; matched gaskets and verified oil line condition prevent repeat failure after rebuild.</li> <li>Engine serial variants across the 6BTA 5.9 family may carry different mounting or oil-port configurations — confirm serial number before ordering to ensure correct variant fitment.</li> <li>Overhaul kit contents and mating flange finish (Ra ≤ 1.6 μm) inspected and verified before dispatch.</li> </ul>
Emission & Exhaust System
Turbocharger 1J716-17010 for Kubota SVL65-2 – Engine Grade
<p><strong>1J716-17010 Turbocharger for Kubota SVL65-2/SVL65-2C, Ni-Resist turbine housing, 1.8 bar boost</strong> — replacement for compact track loader intake/exhaust systems.</p> <ul> <li>System-level match: pairs with intake gaskets, oil feed lines, and air filtration during engine overhaul</li> <li>Journal bearing radial play ≤0.03 mm, pre-lubricated with ISO VG 32 synthetic oil</li> <li>Rotational balance verified up to 120,000 RPM</li> </ul> <p>Matched intake and exhaust components ship in one consignment for complete rebuild sequencing.</p>
Emission & Exhaust System
Aftermarket RHF4 Turbocharger SBA135756170 for Perkins 404C-22T – Engine Grade
<p><strong>RHF4 Turbocharger SBA135756170 for Perkins 404C-22T, AL7075-T6 Compressor Wheel</strong> — compatible with Perkins 404C-22T, 404D-22T, CAT 3024C, and Shibaura N844L engines. This turbocharger belongs to the intake and emission system where matched airflow and sealing are critical. Supplying it alongside gaskets, oil feed lines, and air charge seals ensures the engine system is restored as a complete unit during rebuild. Cross-reference numbers include M87772751, VA420057, and 135756170.</p> <ul> <li>Overhaul kit contents verified item by item before dispatch</li> </ul>
Emission & Exhaust System
K03 Turbocharger 7256748 for Doosan D34 Engine – Engine Grade
<p><strong>K03 Turbocharger 7256748 for Doosan D34 Engine, 74–100 HP</strong> — compatible with Doosan D34 and Bobcat skid steer loaders including A770, S740, S750, T770.</p> <ul> <li>Part of the intake and emission system; matched gaskets, oil feed lines, and air filters should be inspected during replacement to prevent repeat failure</li> <li>Engine serial prefix determines turbo port orientation and flange pattern variant</li> <li>Cross-reference: 7256748REM, 150105-00344, 5303-970-0458 (cross-reference only)</li> </ul> <p>Overhaul kit contents verified item-by-item against your specific engine build record before dispatch.</p>
Emission & Exhaust System
Engine Grade TD04L4 Turbocharger for Kubota V3307-DI Engine
<p><strong>TD04L4 Turbocharger, Ni-Resist D5S Housing, 1.8 bar Max Boost</strong> — replacement for Kubota V3307-DI-T-E3B and V3307-DI-TE3-Q engines in SVL75-2 loaders. Part of the intake and emission system; oil feed line condition, intercooler core, and EGR passages should be inspected together during rebuild to address the root cause of turbo failure. Engine serial variant affects oil port orientation and mounting pattern — confirm exact designation before ordering.</p> <ul> <li>Cross-reference interchange: 1J774-17010, 1J774-17012, 49177-03250, 49177-03251</li> <li>Forged 7075-T6 compressor wheel, ±0.02 mm runout tolerance, dual ceramic ball bearings</li> <li>Matched overhaul kits and gasket sets ship together for complete rebuild workflows</li> </ul>