Belts
10,000+ SKUs across 8 categories. CAT · Komatsu · Hitachi · Volvo · Hyundai and more. MOQ 1 piece.
Belts
275 items
Belt Drive Systems
139T 1-1/8″ Rear Drive Belt for Harley Touring – System-Matched
<p><strong>40024-04 Rear Drive Belt, 139T 1-1/8"</strong> — compatible with Harley Touring FLHR, FLHT, FLHX models (2004–2006). Aramid-reinforced EPDM compound resists heat, ozone, and oil mist in final-drive belt systems. Replace alongside matched sprockets, tensioners, and seals to maintain correct system tolerances and address root-cause failure. Multiple OEM cross-references available (40024-04, 1204-0063, 58-439).</p> <ul> <li>Fits Harley Davidson Touring family powertrains</li> <li>ISO 9001 manufacturing standard</li> <li>Engine system-matched supply prevents premature re-failure</li> </ul> <p>Matched overhaul kits and adjacent components ship as one verified consignment.</p>
Belt Drive Systems
Fan Belt 84331239 for New Holland Loaders – Engine Grade
<p><strong>84331239 Fan Belt</strong> – EPDM rubber compound with aramid tensile cords, –40°C to +120°C range</p> <ul> <li>Fits New Holland L221, L223, L225, L228, L230, C227, C232, C238 loaders (cross-reference only)</li> <li>Part of the engine cooling drive system — matched tensioner and pulley inspection recommended during replacement</li> <li>Surface rib profiling aligned to water pump and alternator pulley geometry for consistent drive</li> <li>Engine serial number affects routing; confirm build variant before ordering</li> <li>Overhaul kit contents verified item-by-item to match your engine specification</li> </ul>
Belt Drive Systems
Rebuild Kit Deck Belt 108-7192 Compatible with Toro Z480
<p><strong>108-7192 Deck Belt</strong>, 108-inch length, 0.5-inch width — replacement for Toro Z480 48" zero-turn mower dual-belt deck drive system.</p> <ul> <li>Operates within the engine-driven deck system, transferring torque to both blade spindles where matched cog profile and tension prevent secondary drivetrain wear during cutting cycles.</li> <li>High-modulus polyester cord with neoprene compound resists stretching and oil exposure across -10°C to +60°C, holding ±0.02-inch tolerance for proper pulley wrap alignment.</li> <li>Confirm machine model 74352 or 74353 and inspect adjacent spindle bearings and tensioners for concurrent replacement needs.</li> </ul> <p>Overhaul kit contents and matched belt sets verified item-by-item before dispatch.</p>
Belt Drive Systems
System-Matched Drive & Starter Belt Kit – Fits EZGO RXV/TXT
<p><strong>Drive & Starter Belt Kit 606136 / 606138</strong> — matched set for Kawasaki 13 HP engines in EZGO RXV/TXT platforms, EPDM aramid-cord starter belt (1/2" × 35.5") and polyester drive belt (1" × 35").</p> <ul> <li>Both belts supplied as a verified pair to maintain consistent tension and uniform wear across the belt drive system during engine overhaul</li> <li>Dimensional tolerance held to ±0.5 mm for correct pulley alignment and contact pattern</li> <li>Addresses root-cause failure by eliminating mismatched stretch between old and new belts</li> </ul> <p>Complete matched set inspected for dimensional and tensile conformance before dispatch.</p>
Belt Drive Systems
REM-1345 Fan Belt Compatible with CAT Komatsu – Engine Grade
<p><strong>REMF-1345 Fan Belt</strong> — high-tensile synthetic rubber compound with polyester cord reinforcement for engine cooling systems.</p> <ul> <li>Compatible with CAT 320D, 320D2, 330D, Komatsu PC200-8, PC220-8, Volvo EC300D, EC480D, Sany SY215C and additional excavator models</li> <li>Designed to maintain correct tension under sustained thermal cycling, supporting radiator fan drive during high-load operations</li> <li>Continuous operating temperature rated at 110°C with anti-ozone and heat-resistant additives</li> </ul> <p>Inspect belt tensioner, idler pulleys and fan hub bearings during the same service event — matched replacement prevents premature re-failure and repeat teardown.</p> <p>Dimensional tolerance and tensile test records verified and shipped with every order.</p>
Belt Drive Systems
Rebuild Kit Ribbed Serpentine Belt 3911584 Compatible with Cummins
<p><strong>Rebuild Kit Ribbed Serpentine Belt 3911584 (cross-reference), 8/K EPDM Belt</strong> — engineered for Cummins B3.9L, 4BT, 6BT, 6BTA, 6BTAA, and ISB CM550 engine accessory drive systems.</p> <ul> <li>Designed for matched replacement alongside tensioners, pulleys, and adjacent seals to prevent repeat failures from misalignment or coolant contamination.</li> <li>EPDM compound with high-modulus polyester cords resists heat and ozone in diesel engine bays, maintaining dimensional tolerance within ±0.3 mm.</li> </ul> <p>Matched accessory-drive component sets ship together, verified against your engine serial and rebuild history.</p>
Belt Drive Systems
Mower Deck Belt K5763-34711 Replacement for Kubota RCK60 Powertrain
<p><strong>K5763-34711 Mower Deck Belt, 3-rib V-belt, 1,980 mm effective length</strong> — replacement for Kubota RCK60 powertrain systems including RCK60-30B, RCK60B-75B, and RCK60D-26BX variants.</p> <ul> <li>EPDM rubber compound with polyester cord reinforcement, rated for –20°C to +90°C continuous operation</li> <li>System-level matching: inspect belt tensioner, idler pulley, and PTO shaft coupling before installation — replacing the belt alone on worn components causes rapid repeat failure</li> <li>Cross-reference K5763-34710 and K5371-34710 valid for older deck builds; confirm deck serial prefix to verify rib profile match</li> <li>Overhaul kit contents verified item-by-item against your engine build specification before dispatch</li> </ul>
Belt Drive Systems
Drive Belt 106-4383 | Matched Set for Toro Groundsmaster 322-D to 345
<p><strong>Drive Belt 106-4383, EPDM Aramid-Reinforced V-Belt</strong> — replacement for Toro Groundsmaster 322-D through 345 and Lawn-Boy mower models.</p> <ul> <li>Operates within the engine belt drive system, transmitting crankshaft torque to auxiliary components</li> <li>Pair with matched tensioners, idler pulleys, and seals during overhaul to address root-cause wear, not just the failed belt</li> <li>Aramid cord reinforcement resists elongation under sustained high-temperature, variable-load conditions</li> <li>V-profile held to ±0.5° angular tolerance for consistent groove contact without lateral slip</li> </ul> <p>Complete matched belt drive sets ship together with system-level inspection records for rebuild verification.</p>
Belt Drive Systems
Upper Drive Belt 50-00178-24 for Carrier Transicold – System-Matched
<p><strong>Upper Drive Belt 50-00178-24</strong> — compatible with Carrier Transicold Extra XT, Ultra XT, X2 1800/2100/2500 series refrigeration units</p> <ul> <li><strong>EPDM/NR compound with aramid cords</strong>, rated to 120°C, dimensional tolerance ±0.3 mm per ISO 4184</li> <li>Belongs to the engine-driven compressor power transmission system — replace as a matched set with tensioner and pulley bearings to address root-cause wear, not just the failed belt</li> <li>Confirm engine serial prefix across X2 and Ultra variants; superseded numbers cross-referenced before dispatch</li> <li>Overhaul kit contents verified item-by-item against your specific engine build record prior to shipment</li> </ul>
Belt Drive Systems
Drive Belt 59011-1077 – Engine Grade Replacement for Kawasaki Mule
<p><strong>Drive Belt 59011-1077, EPDM compound with aramid-reinforced tensile cords</strong> — replacement for Kawasaki Mule CVT systems spanning Mule 2010 through 4010 Trans4x4 variants.</p> <ul> <li>Trapezoidal profile held within ±0.15° pitch and angle tolerances for precise primary and secondary pulley engagement</li> <li>Micro-ribbed surface reduces slippage during high-torque acceleration common in UTV duty cycles</li> <li>Operates across –40°C to +120°C, resisting ozone degradation in dusty or muddy environments</li> </ul> <p>Matched CVT service components available in a single system-level kit — overhaul sequencing confirmed before dispatch.</p>
Belt Drive Systems
Rebuild Kit Fan Belt 6669034 Compatible with Bobcat 751-S130
<p><strong>6669034 Fan Belt, 11×1055LA serpentine type</strong> — compatible with Bobcat 751, 753, 763, 773, S130 skid steer loaders. Heat and oil resistant rubber compound with polyester cord reinforcement maintains tension stability across rebuild cycles. Correct groove geometry match prevents slip under peak torque during cooling system reassembly. Overhaul kit contents and matched belt drive components verified before dispatch.</p>
Belt Drive Systems
Wheel Drive Belt 265-458 for Exmark Metro Mowers – System-Matched
<p><strong>Wheel Drive Belt 265-458</strong>, high-tensile synthetic rubber with reinforced polyester cord — replacement for Exmark Metro walk-behind mower engine-driven traction systems.</p> <ul> <li>Operates within the crankshaft-driven power transfer loop; material compound and length tolerance (±0.8 mm) must match engine torque output to prevent creep or accessory belt overload</li> <li>Inspect idler pulleys, tensioner springs, and adjacent drive components alongside belt replacement to address root-cause failures and avoid repeat downtime</li> <li>Fits Kawasaki and Kohler engine variants across M15KA, M16KA, M32, MG16KA, and MG481KA model series</li> <li>Compatible OEM references: 1323288, 6586BR, 12-9257, 75-177 (cross-reference only)</li> </ul> <p>Matched belt, tensioner, and idler kits ship together for complete system rebuilds.</p>