Glow Plug
10,000+ SKUs across 8 categories. CAT · Komatsu · Hitachi · Volvo · Hyundai and more. MOQ 1 piece.
Glow Plug
58 items
Engine Auxiliary Components
Rebuild Kit Glow Plug Compatible with Perkins 402D-05 404D-15
<p><strong>185366250 / 185366220 Glow Plug Set for Perkins 402D-05 / 404D-15</strong>, M10×1.25 thread, 12V rapid heat cycle, matched to engine auxiliary cold-start system requirements.</p> <ul> <li>Replacing glow plugs in matched sets with ±3% resistance tolerance prevents uneven cylinder pre-heating, ECU fault codes, and incomplete combustion soot loading</li> <li>Voltage ramp rate and peak tip temperature aligned with Perkins 400-series ECU expectations to avoid tip burnout or hard-start cylinder scoring</li> <li>Adjacent system inspection recommended at replacement: glow plug relay, controller timing, wiring harness voltage drop, injector spray pattern, and crankcase oil condition</li> </ul> <p>Cross-reference part numbers 185366250, 185366220, NL-185366220, NL-185366250, SBA185366220 verified for superseded and alternate variants.</p> <p>Resistance and thermal ramp test records provided with each batch, matched sets shipped together for uniform cold-start performance across all cylinders.</p>
Engine Auxiliary Components
Rebuild Kit Glow Plug 7030400 Compatible with Doosan D18/D24
<p><strong>Glow Plug 7030400, 11V 5.5A, M12×1.25 Thread</strong> — replacement for Doosan D18/D24 and Bobcat S510–S590, T550, T590 engine cold-start systems.</p> <ul> <li>Part of the engine auxiliary ignition circuit; pair with controller and wiring harness checks to prevent repeat no-start faults</li> <li>Dual copper washers and Viton O-ring seal must match cylinder head port condition for reliable cold ignition</li> <li>Resistance tolerance ±3% ensures even thermal ramp-up across all cylinders during rebuild</li> </ul> <p>Batch resistance and thermal test records ship with every order for rebuild verification.</p>
Engine Auxiliary Components
Matched Set Glow Plug 8-98290-755-0 for Isuzu 4JJ1 4HK1 Engine Rebuild
<p><strong>8-98290-755-0 Glow Plug, 4-Piece Matched Set, 11V–14.5V Operating Voltage</strong> — replacement for Isuzu 4JJ1 and 4HK1 engines (cross-reference 8-97379-296-0, 8982907550).</p> <ul> <li>Replacing glow plugs as a matched set during rebuild ensures uniform preheat across all cylinders, preventing misfire-induced soot that compromises downstream DPF life.</li> <li>Dual-coil ceramic element with stainless-steel sheath (AISI 304) resists corrosion from diesel additives between overhaul intervals.</li> <li>Fits Isuzu NPR, NQR, FTR and Chevrolet/GMC W-series tiltmaster platforms.</li> </ul> <p>Complete 4-piece set ships with resistance and thermal rise verification records for rebuild documentation.</p>
Engine Auxiliary Components
Glow Plug 16281-65510 Replacement for Kubota D905/D1305 Powertrain
<p><strong>Glow Plug 16281-65510</strong> — compatible with Kubota D905/D1005/D1105/D1305 diesel engines, 0.95–1.05 Ω resistance at 20°C, stainless steel body with nickel-chromium heating element.</p> <p>Part of the cold-start pre-heating system, this glow plug matches ECU diagnostic thresholds and works with injectors and battery circuits to deliver reliable ignition. Ceramic insulator meets IEC 60335 dielectric strength for high-humidity operation.</p> <ul> <li>Fits Kubota B-series tractors including B1700, B2100, B2400, B7500, B7800 families</li> <li>Cross-reference: 1628165510, 16241-52033, 16241-52032</li> </ul> <p>Matched engine auxiliary sets shipped together for complete overhaul jobs — rebuild-shop supply from XUNPO.</p>
Engine Auxiliary Components
Rebuild Kit Glow Plug 6655233 Compatible with Kubota V1903 V2003T
<p><strong>6655233 Glow Plug</strong> — dual-coil, 12V/24V, AISI 310 stainless sheath</p> <ul> <li>Compatible with Kubota V1903, V2003T, V2203, D1703 series and Bobcat skid steers, compact excavators</li> <li>Matched cold-start ignition supply for post-rebuild break-in; uneven pre-heat across cylinders causes washdown and misfires on first start</li> <li>Tier I / Tier II / Interim Tier IV variants require correct thermal specification — confirm engine serial prefix before ordering</li> </ul> <p>Overhaul kits often omit glow plugs. Replacing as a full set ensures uniform pre-chamber ignition and protects fresh piston rings and cylinder head work. Batch resistance and thermal cycle test records ship with each order.</p>
Engine Auxiliary Components
Glow Plug 16693SRV Replacement for Generac MLT6SMD Powertrain
<p><strong>16693SRV Glow Plug, dual-coil ceramic element with integrated thermal cutoff</strong> — replacement for Generac MLT6SMD light tower equipped with Mitsubishi L3E engine. Tip reaches 1,000°C within 12 seconds; nickel-chromium sheath resists corrosion in coastal and chemically treated environments.</p> <ul> <li>Part of the L3E diesel ignition system — correct thermal ramp and resistance specification prevents cold-start misfire that cascades into cylinder washdown and oil dilution</li> <li>Matched set supply recommended to avoid cylinder-to-cylinder ignition imbalance; verify resistance against controller pre-heat timing</li> <li>Dimensional tolerance held to ±0.05 mm on thread pitch and body diameter ensures proper sealing against cylinder head combustion face</li> </ul> <p>Full ignition system components shipped as matched sets for balanced L3E performance.</p>
Engine Auxiliary Components
Matched Set Glow Plug MIU805954 for Yanmar 3TNV80F
<p><strong>MIU805954 Glow Plug, Dual-Coil Ceramic, 12 V</strong> — replacement for Yanmar 3TNV80F, 3TNV76, 3TNE74C, and compatible John Deere 1023E, 2025R, XUV855D diesel engines.</p> <ul> <li>Part of the cold-start and pre-combustion system; replace as a matched set across all cylinders to maintain consistent resistance, balanced ignition, and prevent ECU fault codes from cylinder imbalance.</li> <li>Stainless steel sheath with ±0.05 mm thread tolerance ensures proper seating depth and heat transfer in sub-zero start conditions.</li> </ul> <p>Matched glow plug sets ship together with batch-consistent heating curves verified per unit.</p>
Engine Auxiliary Components
Glow Plug 185366250 185366220 for Perkins 402D 403D 404D – Engine Grade
<p><strong>Glow Plug 185366250 185366220, Engine Auxiliary Cold-Start Component, 11 V–14.5 V DC</strong> — replacement for Perkins 402D, 403D, 404D series. Part of the engine pre-combustion system; matched with injectors, head gasket, and valve stem seals during overhaul to ensure balanced combustion and reliable cold starts. Dual-seal design with Viton O-ring prevents compression gas leakage after cylinder head service.</p> <ul> <li>Compatible with New Holland, CASE, Hitachi, Kioti, and Northern Lights compact equipment</li> <li>3-piece kit, ceramic-insulated element rated for 50,000+ ignition cycles</li> <li>Thread torque 15–18 N·m, protrusion tolerance ±0.1 mm for rebuilt engines</li> </ul> <p>Oversize grade and dimensional match confirmed per engine serial and rebuild history before dispatch.</p>
Engine Auxiliary Components
Matched Set Glow Plug Compatible with Perkins 404D-22 404C-22
<p><strong>185366190 TPN257 Glow Plug Set</strong> for Perkins 404D-22 / 404C-22 engines — M10×1.25 thread, 90° conical seat, Inconel 600 heating element. Part of the engine auxiliary cold-start system; matched set of four ensures uniform cylinder pre-heating and consistent ECU timing feedback during rebuilds. Replacing all plugs together prevents misfire-induced injector wear from uneven resistance across cylinders.</p> <ul> <li>Compatible with Perkins 404D-22, 404D-22T, 404C-22, 104-19, 104-22 and FG Wilson, JCB, Takeuchi, Terex equipment</li> <li>OEM cross-reference: 185366190, TPN257, 185366092, 185366180, T436932</li> </ul> <p>Set-matched glow plugs ship with resistance and thermal cycling inspection records per batch.</p>
Engine Auxiliary Components
Glow Plug 19077-65510 for Kubota D1403 D1703 – Engine Grade
<p><strong>19077-65510 Glow Plug</strong> — Engine-grade replacement for Kubota D1403, D1503, D1703, and D1803 families, dual-coil Ni-Cr heating element with ceramic insulation, heat-up under 12 seconds to 850°C. This preheating component belongs to the D-series cold-start system — matched sets ensure uniform thermal response across all cylinders, while correct engine serial variant matching (e.g., D1703-M-E2B vs. D1703-EB) prevents resistance mismatches and repeat failures. Supplied as matched sets with resistance verification and thermal cycle records included for overhaul traceability.</p>
Engine Auxiliary Components
Glow Plugs 7030400 | Matched Set for Doosan D24 Bobcat S530 S570
<p><strong>7030400 Glow Plug, M12×1.25 Thread, 25.5 mm Seating Depth</strong> — replacement for Doosan D18, D24 and Bobcat S510–S590 diesel engines. Part of the cold-start auxiliary system, this ceramic-element plug stabilizes at 1100°C within 12 seconds and features a DIN 1.4841 stainless housing for corrosion resistance. Replace as a matched set of four to ensure balanced cylinder pre-heating and avoid repeated cranking damage to starters and batteries.</p> <ul> <li>Verify glow plug control module voltage and inspect cylinder head bore threads before installation</li> <li><strong>Matched set supply</strong> with individual resistance and thermal rise-time test records included per shipment</li> </ul>
Engine Auxiliary Components
Glow Plug 8-98290-755-0 | Overhaul Component for Isuzu 4JJ1 4HK1
<p><strong>Glow Plug 8-98290-755-0, 11V–14.5V, AISI 304 Stainless Sheath</strong> — replacement for Isuzu 4JJ1 and 4HK1 diesel engines used in NPR, NQR, FTR, and FVR medium-duty trucks.</p> <ul> <li>Supplied as a matched 4-piece set to ensure balanced cylinder preheat and protect downstream DPF and EGR components during cold cycles</li> <li>Tip protrusion tolerance verified to prevent piston interference across 4HK1-TCS and 4HK1-TCN serial variants</li> <li>Cross-reference verified against superseded 8-97379-296-0 lineage; engine serial confirmation supported before dispatch</li> </ul> <p>10364</p>