Belts
10,000+ SKUs across 8 categories. CAT · Komatsu · Hitachi · Volvo · Hyundai and more. MOQ 1 piece.
Belts
211 items
Belt Drive Systems
Fan Belt 84331239 Replacement for New Holland L221 L228 Engine Grade
<p><strong>84331239 Fan Belt</strong> with EPDM rubber compound and ISO 4184 dimensional tolerance (±0.3 mm) for New Holland L221, L228, C232 loader engines.</p> <ul> <li>Belongs to the <strong>engine belt drive system</strong> — pair with tensioners, idler pulleys, and alternator belts to address root failure causes like pulley misalignment or bearing wear on driven accessories.</li> <li>Sourced under one account with matched component sets for complete cooling circuit overhauls.</li> </ul> <p>Overhaul kit contents verified item-by-item against your engine serial variant before dispatch.</p>
Belt Drive Systems
108-7192 Deck Belt Replacement for Toro Z480 Matched Set
<p><strong>108-7192 Deck Belt, 108" x 0.5", 40° V-profile</strong> — replacement for Toro Z480 48" TimeCutter zero-turn mowers (models 74352, 74353). EPDM compound with aramid tensile cords handles continuous commercial deck operation up to 120°C.</p> <ul> <li>Part of the cutting deck drive system — belt, spindle bearings, pulleys, and tensioners should be replaced as a matched set during overhaul to prevent repeat failure from misalignment or worn components</li> <li>Correct pitch length and V-profile ensure full pulley contact, protecting spindle bearings from secondary wear</li> </ul> <p>Complete deck rebuild kit contents verified item-by-item before dispatch.</p>
Belt Drive Systems
Engine Grade V-Belt 01179566 – Fits Deutz F3L2011 F4L2011 Engine
<p><strong>V-Belt 01179566 for Deutz F3L2011 / F4L2011 Engine Belt Drive System</strong> — chloroprene rubber compound with high-modulus polyester cord reinforcement, dimensional tolerance ±0.3 mm.</p> <ul> <li>Fits Deutz F3L2011, F4L2011, BF3L2011, BF4L2011, TD2011L04 and TCD2011L04 series diesel engines powering excavators, crushers, and mobile power units</li> <li>Belongs to the engine belt drive system — replace alongside tensioner, pulleys, and adjacent drive components as a matched set to prevent misalignment-induced slippage and repeat teardowns</li> <li>OEM cross-reference: 0117-9566, 02235810, MT40285048 (reference only)</li> </ul> <p>Matched belt drive components ship as one consignment with quality inspection records included.</p>
Belt Drive Systems
Rebuild Kit Drive & Starter Belt Compatible with Kawasaki 13 HP EZGO
<p><strong>606136 606138 Belt Kit, 1/2" W × 35.5" OD Starter & 1" W × 35" OD Drive</strong> — compatible with Kawasaki 13 HP engines in EZGO RXV, TXT, ST, and Workhorse models (2008–present). Both belts supplied as a matched EPDM set with aramid tensile cords and trapezoidal drive profile for correct tension balance across the system. Cross-reference interchange: 606138, 265-586, 606136, 16548G1.</p> <ul> <li>Matched replacement addresses root-cause slippage and glazing by renewing both belts together</li> <li>±0.3 mm dimensional inspection tolerance ensures full pulley groove contact</li> <li>Kit contents verified item-by-item before dispatch to match engine build requirements</li> </ul>
Belt Drive Systems
Fan Belt REMF-1345 Replacement for CAT 320D Komatsu PC200 Powertrain
<p><strong>REMF-1345 Fan Belt, NBR Compound with Polyester Cord Reinforcement</strong> — engineered for excavator engine cooling systems where heat and dynamic load demand stable tension retention.</p> <ul> <li>Fits CAT 320D, 320D2, 323D, 325D, Komatsu PC200-6 through PC200-8M0, plus select Volvo, Hyundai, and Doosan models</li> <li>NBR rubber rated for -25°C to +120°C continuous operation, matching Tier 4 Final EGR bay temperatures</li> <li>Inspect tensioner, idler pulley, and fan hub bearing during the same service event to prevent mismatched wear and repeat teardowns</li> </ul> <p>Matched cooling system components ship together so your overhaul kit arrives complete and sequenced.</p>
Belt Drive Systems
Engine Grade Ribbed Belt 3911584 – Rebuild Kit for Cummins 4BT 6BT ISB
<p><strong>3911584 Ribbed Belt, 8/K Section, EPDM</strong> — replacement for Cummins 4BT, 6BT, ISB engine front-end accessory drives.</p> <ul> <li>Part of the belt drive system including tensioner and idler pulleys; matched replacement avoids repeat failures from uneven wear</li> <li>EPDM compound resists heat up to 150°C with high-tensile polyester cord reinforcement</li> <li>Confirm engine serial variant and pulley groove profile before ordering</li> </ul> <p>Overhaul kit contents verified item-by-item against your rebuild specification before dispatch.</p>
Belt Drive Systems
Belt K5763-34711 for Kubota RCK60 Series – Engine Grade
<p>记录ID: 10557</p>
Belt Drive Systems
Drive Belt 106-4383 for Toro Groundsmaster – System-Matched
<p><strong>106-4383 Drive Belt, aramid cord reinforced, ±0.15 mm profile tolerance</strong> — compatible with Toro Groundsmaster 322-D, 325-D, 327, 328-D, 345 and Lawn-Boy mowers. Operates from –20°C to +85°C under sustained crankshaft-to-deck torque loads.</p> <ul> <li>Paired with tensioners, idler pulleys and clutch seals as a matched engine-system set to resolve root-cause belt drive failures</li> <li>Rebuild shops can request a single system-level bill of materials covering belt, pulley and seal components in one consignment</li> </ul> <p>Cross-reference numbers 53-9660, 265-896 and 23-1820 verified for serial-range applicability; complete matched set dispatched together with dimensional inspection records included.</p>
Belt Drive Systems
Upper Drive Belt 50-00178-24 Replacement for Carrier Transicold X2 Overhaul Component
<p><strong>Upper Drive Belt 50-00178-24, 12.7 mm Pitch</strong> — replacement for Carrier Transicold X2 and Ultra series refrigeration units. High-tensile chloroprene rubber with aramid cord reinforcement, ±0.3 mm dimensional tolerance.</p> <ul> <li>Fits Extra XT, Ultra XT, X2 1800–2500R models in engine-driven compressor belt drive systems</li> <li>Aramid-reinforced CR compound resists oil, ozone, and thermal degradation under continuous start-stop cycles from -20°C to +50°C</li> <li>Correct belt spec prevents compressor clutch damage and maintains thermal efficiency during overhaul</li> </ul> <p>Overhaul kits and matched tensioner components ship together with system-level documentation.</p>
Belt Drive Systems
Rebuild Kit Drive Belt 59011-1077 Compatible with Kawasaki Mule
<p><strong>Drive Belt 59011-1077 for Kawasaki Mule UTV, Aramid-reinforced EPDM</strong> — replacement for CVT systems across Mule 2010 through 4010 Trans4x4 series.</p> <ul> <li>Fits KAF540, KAF620E, KAF620G, KAF620M9F, KAF620P9F and related engine variants</li> <li>Trapezoidal profile with ±0.15 mm tolerance ensures correct sheave engagement</li> <li>Continuous operating temperature rated up to 120°C for engine-driven CVT demands</li> </ul> <p>Inspect primary and secondary sheaves, tensioner springs, and clutch alignment before installation — belt failure often traces to system-level causes rather than the belt itself. Matched component supply available for complete CVT overhaul kits.</p> <p>Cross-reference 59011-1053 verified; dimensional grade confirmed per your engine rebuild history before dispatch.</p>
Belt Drive Systems
System-Matched Wheel Drive Belt – Fits Exmark Metro Mowers
<p><strong>265-458 Wheel Drive Belt</strong> — replacement for Exmark Metro Mowers, neoprene compound with polyester cord reinforcement. Fits models M15KA322P through MG481KA483P. Operates from –20°C to +80°C with ±0.3 mm tolerance. This belt is part of the engine power-transmission system; replacing it alongside tensioners and idler pulleys prevents mismatched wear and early repeat failures. Cross-reference numbers include 1323288, 6586BR, and 12-9257 for interchange identification. Matched belt-and-tensioner sets ship together for complete drivetrain service.</p>
Belt Drive Systems
Engine Grade Belt 50-00178-19 Compatible with Carrier Ultima XTC X2
<p><strong>50-00178-19 Belt for Carrier Ultima XTC and X2 Series</strong> — EPDM multi-rib design with aramid cord reinforcement, SAE J1459 compliant profile.</p> <ul> <li>Fits Carrier Ultima XTC, ULTRA XT, X2 1800, X2 2100, X2 2100A, X2 2100R, X2 2500A, X2 2500R transport refrigeration compressors (cross-reference: 500017819, CP10615)</li> <li>Supplied as part of a matched compressor drive set — belt length tolerance coordinated with tensioner stroke to prevent slippage and premature failure</li> <li>Pulley groove variant check recommended across X2 build generations before ordering</li> </ul> <p>Overhaul kit contents verified item-by-item against your compressor serial to ensure complete system match on dispatch.</p>