Belts
10,000+ SKUs across 8 categories. CAT · Komatsu · Hitachi · Volvo · Hyundai and more. MOQ 1 piece.
Belts
57 items
Belt Drive Systems
V-Belt 9001A-96003 for Toyota 4Y Engine Forklifts – High-Durability Replacement
<p>Stop downtime from snapped or slipping belts — this <strong>V-belt 9001A-96003</strong> delivers OEM-matched grip and heat resistance for Toyota 4Y-engine forklifts, so your 7FG and 8FG series machines stay online longer between replacements.</p> <ul> <li>Fits over 120 Toyota forklift models including 7FG15–7FG30, 8FG18B, 8FG25B, and FGZN series — no more cross-referencing three catalogs</li> <li>Manufactured with aramid tensile cords (not polyester) for consistent tension retention under continuous high-RPM operation — a detail that matters when your 4Y engine runs at 2,800+ RPM daily</li> <li>Pre-stretched and dynamically balanced to eliminate early vibration-induced wear — solving the “replaces every 3 months” cycle you’ve seen with generic belts</li> <li>Ships same-day from Guangzhou warehouse — no waiting weeks for OEM backorders or risking counterfeit imports</li> </ul>
Belt Drive Systems
Fan Belt 84331239 for New Holland L221–L230 & C227–C238 Loaders – Heavy-Duty Replacement
<p>Stop unexpected shutdowns and keep your New Holland loader running strong through long shifts — this <strong>fan belt 84331239 for New Holland loader</strong> delivers OEM-equivalent grip and heat resistance, even under continuous high-load operation.</p> <ul> <li>Fits L221–L230 & C227–C238 models — verified with correct pitch length (1,095 mm) and trapezoidal profile for precise pulley engagement</li> <li>Eliminates the guesswork: pre-tested for tension retention after 50+ hours of simulated field use</li> <li>Ships same-day from our Guangzhou warehouse — no waiting weeks for OEM backorders</li> <li>Backed by XUNPO’s 6-month warranty against premature cracking or stretch failure</li> </ul>
Belt Drive Systems
54″ Deck V-Belt 130-0843 for Toro & Exmark Zero-Turn Mowers – Heavy-Duty Replacement
<p>Stop losing mowing time to belt slippage, snapping, or premature wear — this heavy-duty 130-0843 v-belt delivers consistent deck drive performance season after season, even under high-torque cutting conditions.</p> <ul> <li><strong>Exact OEM-spec replacement</strong> for Toro TimeCutter (75754 MX 5475, 74793 SW 5425) and Exmark Quest S-Series (QZS708GEM54200), including critical Rev A compatibility</li> <li>Features aramid-reinforced tensile cords and oil-resistant EPDM compound — the same construction used in factory-fresh belts for extended life in hot, dusty, or wet environments</li> <li>No more cross-referencing confusion: fits all listed SN ranges out of the box, with verified fit on machines using dual-belt deck drives (e.g., Toro 54" MX decks with independent blade engagement)</li> <li>Ships same-day from Guangzhou warehouse — no waiting weeks for OEM backorders or risking counterfeit imports</li> </ul>
Belt Drive Systems
Alternator Belt 78-1918 / 78-1543 for Thermo King TriPac APU Replacement
<p>Stop unexpected APU shutdowns and costly roadside downtime with a direct-fit <strong>Thermo King alternator belt</strong> that delivers OEM-equivalent performance — without the OEM wait or markup. Engineered for consistent tension retention and heat resistance, this belt eliminates slippage and premature failure common in high-cycle TriPac APU applications.</p> <ul> <li>Fits TriPac APU units requiring part numbers <strong>78-1918 or 78-1543</strong> — verified cross-reference, not just visual match</li> <li>Made with aramid-reinforced EPDM compound for >12,000-hour service life under continuous 24/7 operation</li> <li>Ships same-day from our Guangzhou warehouse — no backorders, no factory delays</li> <li>Each belt includes batch-tested tensile strength certification (≥1,850 N) — critical for TriPac’s high-RPM alternator pulley setup</li> </ul>
Belt Drive Systems
Drive Belt 7177671 for Bobcat S630/S650/T630/T650/T870 – EPDM Cogged V-Belt
<p>Stop downtime from cracked, slipping, or premature belt failure on your Bobcat S630, S650, T630, T650, or T870 — this <strong>bobcat drive belt</strong> delivers OEM-equivalent power transfer with 30% longer life than standard EPDM belts. Built with aramid tensile cords and banded 3VX cogged construction (4×10×1670La), it stays perfectly aligned under high-torque loader cycles — no more mid-shift tension loss or heat-induced stretching.</p> <ul> <li>Exact-fit replacement for genuine Bobcat part #7177671 — verified against machine service manuals, not just model lists</li> <li>EPDM rubber + aramid fabric resists oil, ozone, and extreme temps — critical for dusty quarry or humid port environments</li> <li>MOQ 1 piece, shipped from Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders</li> <li>Backed by XUNPO’s 6-month warranty and technical support from excavator drivetrain specialists</li> </ul>
Belt Drive Systems
Drive Belt 154537-001 for Vermeer BC600XL Brush Chipper – Heavy-Duty Replacement
<p>Stop unexpected downtime and costly delays when your Vermeer BC600XL brush chipper stalls mid-job — this heavy-duty <strong>Vermeer BC600XL drive belt</strong> delivers OEM-matched torque transfer and heat resistance for uninterrupted operation, even under continuous high-load chipping.</p> <ul> <li>Exact-fit replacement for part number <strong>154537-001</strong> — no guesswork, no misalignment, no premature wear</li> <li>Reinforced aramid tensile cords (not standard polyester) for 2.3× longer service life vs. generic belts</li> <li>Pre-stretched during manufacturing to eliminate initial stretch-in — critical for maintaining proper tension on the BC600XL’s dual-pulley drive system</li> <li>Ships from our Guangzhou warehouse in 2–5 working days — MOQ just 1 piece, no minimum order pressure</li> </ul>
Belt Drive Systems
3 groove pump drive belt 6660994 for Bobcat 753/763/773/7753 – EPDM + aramid reinforced
<p>Stop unexpected pump drive failures and costly downtime on your Bobcat 753, 763, 773, or 7753 — this <strong>6660994 belt</strong> delivers OEM-matched fit and proven EPDM + aramid reinforcement for heat resistance, zero stretch under load, and 2× the service life of standard CR belts.</p> <ul> <li>Engineered as a direct-fit 3VX 1550La joined belt — no tensioning guesswork or alignment issues</li> <li>EPDM rubber resists ozone, weathering, and temps up to 150°C; aramid cords eliminate elongation even during continuous high-RPM operation</li> <li>Ships from our Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders</li> <li>Backed by XUNPO’s 12-month warranty and technical verification support before you order</li> </ul>
Belt Drive Systems
Belt Set for Thermo King SB 200–400 Refrigeration Units – Direct Replacement
<p>Stop downtime from snapped or slipping belts on your Thermo King SB unit—this <strong>Thermo King SB belt set</strong> delivers OEM-equivalent fit, tension retention, and heat resistance right out of the box. Built for high-cycle refrigeration units, it eliminates the guesswork and delays of sourcing mismatched belts across multiple suppliers.</p> <ul> <li>Includes all three critical belts in one kit: alternator (78-1341), fan (78-603), and engine/idler (78-629)—no more cross-referencing or missing components</li> <li>Verified for SB 200–400 series including SB 210+, 310+, and 330 models—yes, even the tricky multi-temp variants</li> <li>Made with aramid-reinforced EPDM compound to resist ozone cracking and thermal stretch—key for transport refrigeration duty cycles</li> <li>Ships same day from our Guangzhou warehouse when ordered before 3 PM CST—no waiting weeks for OEM backorders</li> </ul>
Belt Drive Systems
Water Pump Belt 50-00162-25 for Carrier Vector & Supra Refrigeration Units
<p>Stop unexpected breakdowns and costly downtime on your Carrier refrigeration units — this genuine-spec <strong>Carrier water pump belt</strong> delivers OEM-level durability and precise fit for Vector X4 7500, X2 1800, Supra 750, and other high-demand transport units. Built with heat-resistant EPDM rubber and aramid tensile cords, it withstands continuous thermal cycling and high-RPM operation — a critical detail most generic belts skip, leading to premature stretch or cracking.</p> <ul> <li>Fits all major Carrier transport models: X4 7500/X4 6600 MT, X2 1800/2100/2500 series, Vector & Supra 650/750</li> <li>Cross-references 14+ part numbers including <strong>50-00162-25</strong>, CA500016225AM, CP10651 — no more guessing or mismatched orders</li> <li>Ships same-day from our Guangzhou warehouse (MOQ 1 piece) — ideal when you need urgent replacement before the next run</li> <li>Backed by XUNPO’s 6-month warranty and technical verification — because one wrong belt can cost hours of service time</li> </ul>
Belt Drive Systems
Deck Drive Belt Kit for Toro 30″ TimeMaster – Direct OEM Replacement
<p>Stop wasting time hunting for a reliable <strong>Toro deck drive belt</strong> that actually lasts through mowing season — this kit delivers OEM-equivalent performance without the 3–4 week wait or 40% markup. Engineered to eliminate belt slippage and premature failure on high-hour TimeMaster decks, it’s built with aramid-reinforced tensile cords (not just polyester) — the same spec used in factory belts for sustained torque transfer under load.</p> <ul> <li>Fits Toro 30" TimeMaster models <strong>20199, 20200, 20975–20978</strong> — verified against service manuals, not just part number cross-references</li> <li>Includes all three critical belts: main deck drive (121-5765), idler-to-PTO (120-3335), and tensioner loop (120-9470)</li> <li>Pre-stretched during manufacturing — no 2–3 hour break-in period required before full-load operation</li> <li>Ships from our Guangzhou warehouse same day if ordered before 3 PM CST — no backorders, no substitutions</li> </ul>
Belt Drive Systems
Water Pump Belt 78-1492 for Thermo King Refrigeration Units – Direct Fit Replacement
<p>Stop refrigeration unit downtime before it starts — this <strong>Thermo King water pump belt</strong> delivers OEM-equivalent reliability and precise fit for critical cooling systems across your Thermo King fleet. Engineered for consistent tension retention under thermal cycling, it eliminates the premature slippage and squealing that plague generic belts in high-heat, high-vibration applications like TS-200 and T-600 units.</p> <ul> <li>Fits 30+ Thermo King models including TK370, T-800R Spectrum, MD-II TLE, and TriPac APU — no guesswork on cross-references</li> <li>Backed by our 3–12 month warranty against manufacturing defects — because belt failure shouldn’t mean a $2,000 compressor inspection</li> <li>Uses EPDM+aramid cord construction — the same material spec used in genuine Thermo King service kits for heat resistance up to 140°C</li> <li>Ships same day from Guangzhou warehouse — no waiting weeks for OEM lead times or risking counterfeit imports</li> </ul>
Belt Drive Systems
V-Belt 32993 for Earthquake Rear Tine Tillers – High-Strength Polyester-Cord Construction
<p>Stop unexpected shutdowns and costly downtime when your Earthquake rear tine tiller belt snaps mid-job — this <strong>v-belt 32993</strong> delivers OEM-equivalent grip and lasting tension with high-strength polyester-cord construction that resists stretch and slippage even under heavy load.</p> <ul> <li>Fits Earthquake rear tine tillers precisely — verified against original 32993 replacement specs, not just “close enough” dimensions</li> <li>670 mm La-length with true 4LX profile (12 mm top width × 8 mm height) — critical for proper pulley engagement and heat dissipation</li> <li>Rubber compound blended for cold-weather flexibility and hot-engine resilience, so it won’t crack or glaze prematurely</li> <li>MOQ 1 piece, ships from Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders</li> </ul>