Belt Drive Systems
10,000+ SKUs across 8 categories. CAT · Komatsu · Hitachi · Volvo · Hyundai and more. MOQ 1 piece.
Belt Drive Systems
84 items
Belt Drive Systems
V-Belt 9001A-96003 for Toyota 4Y Engine Forklifts – High-Durability Replacement
<p>Stop downtime from snapped or slipping belts — this <strong>V-belt 9001A-96003</strong> delivers OEM-matched grip and heat resistance for Toyota 4Y-engine forklifts, so your 7FG and 8FG series machines stay online longer between replacements.</p> <ul> <li>Fits over 120 Toyota forklift models including 7FG15–7FG30, 8FG18B, 8FG25B, and FGZN series — no more cross-referencing three catalogs</li> <li>Manufactured with aramid tensile cords (not polyester) for consistent tension retention under continuous high-RPM operation — a detail that matters when your 4Y engine runs at 2,800+ RPM daily</li> <li>Pre-stretched and dynamically balanced to eliminate early vibration-induced wear — solving the “replaces every 3 months” cycle you’ve seen with generic belts</li> <li>Ships same-day from Guangzhou warehouse — no waiting weeks for OEM backorders or risking counterfeit imports</li> </ul>
Belt Drive Systems
Fan Belt 84331239 for New Holland L221–L230 & C227–C238 Loaders – Heavy-Duty Replacement
<p>Stop unexpected shutdowns and keep your New Holland loader running strong through long shifts — this <strong>fan belt 84331239 for New Holland loader</strong> delivers OEM-equivalent grip and heat resistance, even under continuous high-load operation.</p> <ul> <li>Fits L221–L230 & C227–C238 models — verified with correct pitch length (1,095 mm) and trapezoidal profile for precise pulley engagement</li> <li>Eliminates the guesswork: pre-tested for tension retention after 50+ hours of simulated field use</li> <li>Ships same-day from our Guangzhou warehouse — no waiting weeks for OEM backorders</li> <li>Backed by XUNPO’s 6-month warranty against premature cracking or stretch failure</li> </ul>
Belt Drive Systems
54″ Deck V-Belt 130-0843 for Toro & Exmark Zero-Turn Mowers – Heavy-Duty Replacement
<p>Stop losing mowing time to belt slippage, snapping, or premature wear — this heavy-duty 130-0843 v-belt delivers consistent deck drive performance season after season, even under high-torque cutting conditions.</p> <ul> <li><strong>Exact OEM-spec replacement</strong> for Toro TimeCutter (75754 MX 5475, 74793 SW 5425) and Exmark Quest S-Series (QZS708GEM54200), including critical Rev A compatibility</li> <li>Features aramid-reinforced tensile cords and oil-resistant EPDM compound — the same construction used in factory-fresh belts for extended life in hot, dusty, or wet environments</li> <li>No more cross-referencing confusion: fits all listed SN ranges out of the box, with verified fit on machines using dual-belt deck drives (e.g., Toro 54" MX decks with independent blade engagement)</li> <li>Ships same-day from Guangzhou warehouse — no waiting weeks for OEM backorders or risking counterfeit imports</li> </ul>
Belt Drive Systems
Alternator Pulley 3926858 for Cummins ISB6.7 ISC8.3 QSB6.7 – Direct-fit Replacement
<p>Stop wasting time and money on alternator pulleys that fail mid-shift or throw belts under load — this <strong>direct-fit Cummins alternator pulley</strong> delivers OEM-equivalent durability and precise tension retention for ISB6.7, ISC8.3, and QSB6.7 engines. Built to match the exact 24-tooth helix angle and 10.5mm pitch diameter of the original, it eliminates harmonic slip and prevents premature belt wear — a common failure point with generic aftermarket units.</p> <ul> <li><strong>Verified cross-reference</strong>: Fits 3926858, 3965146, and 3965147 applications — no guesswork needed</li> <li>Engineered for Cummins CM2250/CM2350 series platforms with factory-matched bore tolerance (Ø32.00 ±0.01 mm)</li> <li>Ready to ship today from our Guangzhou warehouse — no 4-week waits or inflated OEM pricing</li> <li>Backed by 6-month warranty and real-time technical support from Cummins-certified parts specialists</li> </ul>
Belt Drive Systems
Alternator Belt 78-1918 / 78-1543 for Thermo King TriPac APU Replacement
<p>Stop unexpected APU shutdowns and costly roadside downtime with a direct-fit <strong>Thermo King alternator belt</strong> that delivers OEM-equivalent performance — without the OEM wait or markup. Engineered for consistent tension retention and heat resistance, this belt eliminates slippage and premature failure common in high-cycle TriPac APU applications.</p> <ul> <li>Fits TriPac APU units requiring part numbers <strong>78-1918 or 78-1543</strong> — verified cross-reference, not just visual match</li> <li>Made with aramid-reinforced EPDM compound for >12,000-hour service life under continuous 24/7 operation</li> <li>Ships same-day from our Guangzhou warehouse — no backorders, no factory delays</li> <li>Each belt includes batch-tested tensile strength certification (≥1,850 N) — critical for TriPac’s high-RPM alternator pulley setup</li> </ul>
Belt Drive Systems
420 chain sprocket kit for Coleman KT196/CK196 go kart — 25T, 32-link, wear-resistant
<p>Stop losing races—and chain tension—mid-run. This <strong>420 chain sprocket kit</strong> delivers rock-solid power transfer and eliminates slippage on Coleman KT196/CK196 go karts, so your 196cc or 212cc (6.5hp) engine puts every ounce of torque to the ground.</p> <ul> <li>Hardened steel construction with precise 0.25" pitch tolerance—critical for preventing chain derailment under high-torque acceleration</li> <li>Pre-matched 25T sprocket + 32-link #420 chain—no guesswork pairing or premature wear from mismatched components</li> <li>Fits factory jackshaft setups without spacers or modifications—ready to bolt on and race</li> <li>Built to outlast generic kits: heat-treated teeth resist hooking and elongation, even after repeated hard launches</li> </ul>
Belt Drive Systems
Drive Belt 7177671 for Bobcat S630/S650/T630/T650/T870 – EPDM Cogged V-Belt
<p>Stop downtime from cracked, slipping, or premature belt failure on your Bobcat S630, S650, T630, T650, or T870 — this <strong>bobcat drive belt</strong> delivers OEM-equivalent power transfer with 30% longer life than standard EPDM belts. Built with aramid tensile cords and banded 3VX cogged construction (4×10×1670La), it stays perfectly aligned under high-torque loader cycles — no more mid-shift tension loss or heat-induced stretching.</p> <ul> <li>Exact-fit replacement for genuine Bobcat part #7177671 — verified against machine service manuals, not just model lists</li> <li>EPDM rubber + aramid fabric resists oil, ozone, and extreme temps — critical for dusty quarry or humid port environments</li> <li>MOQ 1 piece, shipped from Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders</li> <li>Backed by XUNPO’s 6-month warranty and technical support from excavator drivetrain specialists</li> </ul>
Belt Drive Systems
Drive Belt 154537-001 for Vermeer BC600XL Brush Chipper – Heavy-Duty Replacement
<p>Stop unexpected downtime and costly delays when your Vermeer BC600XL brush chipper stalls mid-job — this heavy-duty <strong>Vermeer BC600XL drive belt</strong> delivers OEM-matched torque transfer and heat resistance for uninterrupted operation, even under continuous high-load chipping.</p> <ul> <li>Exact-fit replacement for part number <strong>154537-001</strong> — no guesswork, no misalignment, no premature wear</li> <li>Reinforced aramid tensile cords (not standard polyester) for 2.3× longer service life vs. generic belts</li> <li>Pre-stretched during manufacturing to eliminate initial stretch-in — critical for maintaining proper tension on the BC600XL’s dual-pulley drive system</li> <li>Ships from our Guangzhou warehouse in 2–5 working days — MOQ just 1 piece, no minimum order pressure</li> </ul>
Belt Drive Systems
3 groove pump drive belt 6660994 for Bobcat 753/763/773/7753 – EPDM + aramid reinforced
<p>Stop unexpected pump drive failures and costly downtime on your Bobcat 753, 763, 773, or 7753 — this <strong>6660994 belt</strong> delivers OEM-matched fit and proven EPDM + aramid reinforcement for heat resistance, zero stretch under load, and 2× the service life of standard CR belts.</p> <ul> <li>Engineered as a direct-fit 3VX 1550La joined belt — no tensioning guesswork or alignment issues</li> <li>EPDM rubber resists ozone, weathering, and temps up to 150°C; aramid cords eliminate elongation even during continuous high-RPM operation</li> <li>Ships from our Guangzhou warehouse in 2–5 working days — no waiting weeks for OEM backorders</li> <li>Backed by XUNPO’s 12-month warranty and technical verification support before you order</li> </ul>
Belt Drive Systems
Belt Set for Thermo King SB 200–400 Refrigeration Units – Direct Replacement
<p>Stop downtime from snapped or slipping belts on your Thermo King SB unit—this <strong>Thermo King SB belt set</strong> delivers OEM-equivalent fit, tension retention, and heat resistance right out of the box. Built for high-cycle refrigeration units, it eliminates the guesswork and delays of sourcing mismatched belts across multiple suppliers.</p> <ul> <li>Includes all three critical belts in one kit: alternator (78-1341), fan (78-603), and engine/idler (78-629)—no more cross-referencing or missing components</li> <li>Verified for SB 200–400 series including SB 210+, 310+, and 330 models—yes, even the tricky multi-temp variants</li> <li>Made with aramid-reinforced EPDM compound to resist ozone cracking and thermal stretch—key for transport refrigeration duty cycles</li> <li>Ships same day from our Guangzhou warehouse when ordered before 3 PM CST—no waiting weeks for OEM backorders</li> </ul>
Belt Drive Systems
Water Pump Belt 50-00162-25 for Carrier Vector & Supra Refrigeration Units
<p>Stop unexpected breakdowns and costly downtime on your Carrier refrigeration units — this genuine-spec <strong>Carrier water pump belt</strong> delivers OEM-level durability and precise fit for Vector X4 7500, X2 1800, Supra 750, and other high-demand transport units. Built with heat-resistant EPDM rubber and aramid tensile cords, it withstands continuous thermal cycling and high-RPM operation — a critical detail most generic belts skip, leading to premature stretch or cracking.</p> <ul> <li>Fits all major Carrier transport models: X4 7500/X4 6600 MT, X2 1800/2100/2500 series, Vector & Supra 650/750</li> <li>Cross-references 14+ part numbers including <strong>50-00162-25</strong>, CA500016225AM, CP10651 — no more guessing or mismatched orders</li> <li>Ships same-day from our Guangzhou warehouse (MOQ 1 piece) — ideal when you need urgent replacement before the next run</li> <li>Backed by XUNPO’s 6-month warranty and technical verification — because one wrong belt can cost hours of service time</li> </ul>
Belt Drive Systems
Deck Drive Belt Kit for Toro 30″ TimeMaster – Direct OEM Replacement
<p>Stop wasting time hunting for a reliable <strong>Toro deck drive belt</strong> that actually lasts through mowing season — this kit delivers OEM-equivalent performance without the 3–4 week wait or 40% markup. Engineered to eliminate belt slippage and premature failure on high-hour TimeMaster decks, it’s built with aramid-reinforced tensile cords (not just polyester) — the same spec used in factory belts for sustained torque transfer under load.</p> <ul> <li>Fits Toro 30" TimeMaster models <strong>20199, 20200, 20975–20978</strong> — verified against service manuals, not just part number cross-references</li> <li>Includes all three critical belts: main deck drive (121-5765), idler-to-PTO (120-3335), and tensioner loop (120-9470)</li> <li>Pre-stretched during manufacturing — no 2–3 hour break-in period required before full-load operation</li> <li>Ships from our Guangzhou warehouse same day if ordered before 3 PM CST — no backorders, no substitutions</li> </ul>