Stop Solenoid
10,000+ SKUs across 8 categories. CAT · Komatsu · Hitachi · Volvo · Hyundai and more. MOQ 1 piece.
Stop Solenoid
29 items
Engine Auxiliary Components
12V dual coil pull solenoid D610-B1V12 for Kubota WG750/DF752 engine start control
<p>Get reliable, OEM-matched starting performance for your Kubota WG750 or DF752 engine — no more frustrating crank-but-no-start failures from weak or counterfeit solenoids. This <strong>12V dual coil pull solenoid D610-B1V12</strong> delivers precise high-torque engagement and clean release, just like factory spec.</p> <ul> <li>Direct replacement for Trombetta D610-B1V12 and Upright 68990-015 — verified fit on WG750, DF752, DF-750, DF972, and D905 engines</li> <li>True dual-coil design: heavy-duty pull coil (for initial engagement) + lower-power hold coil (to prevent overheating during extended cranking)</li> <li>Pre-tested for 12V cold-cranking response down to –20°C — critical for field operators in early-morning starts or high-altitude sites</li> <li>Ships same-day from our Guangzhou warehouse; no MOQ — order 1 piece for urgent repair or 100 for your distributor shelf</li> </ul>
Engine Auxiliary Components
12V Fuel Stop Solenoid Valve for Thermo King TK249–TK486 Engines
<p>Stop unexpected engine shutdowns and keep your Thermo King refrigeration units running reliably — even under heavy-duty transport conditions. This <strong>12V fuel stop solenoid valve for Thermo King transport refrigeration</strong> delivers OEM-equivalent performance at a fraction of the cost, with zero compatibility guesswork.</p> <ul> <li>Direct-fit replacement for 41-9100, 42-0100, and 11+ other cross-references — no adapters or field modifications needed</li> <li>Verified drop-in fit for TK486, TK388, TK249 engines and SLXi, SB, TS, SLX, and TriPac APU models — including critical variants like TK486V and SLXi Whisper Pro-50</li> <li>Built with high-temp coil insulation and brass-plated armature — a detail that prevents thermal lockup during extended idling or hot-climate operation</li> <li>Ships same-day from our Guangzhou warehouse (MOQ just 1 piece), so you’re never held up waiting for urgent repairs</li> </ul>
Engine Auxiliary Components
Stop Solenoid 1502-12A2U1B2 for Woodward 12V Engine Shutdown Control
<p>Stop your Woodward engine reliably—every time—with the <strong>stop solenoid 1502-12A2U1B2</strong>, engineered for instant, fail-safe 12V shutdown control. No more guessing whether the solenoid will engage under load or after hours of operation.</p> <ul> <li>Direct replacement for Woodward part numbers <strong>1502-12A2U1B2</strong>, 150212A2U1B2, 1500-2114, and 15002114—no adapters or wiring mods needed</li> <li>Built to Woodward’s original coil resistance spec (≈1.8–2.2 Ω @ 20°C), ensuring clean de-energization without residual hold-in current</li> <li>Prevents costly unplanned downtime caused by inconsistent OEM lead times or counterfeit solenoids with drifted pull-in voltage thresholds</li> <li>Ready to ship today from our Guangzhou warehouse—no waiting weeks for factory backorders</li> </ul>
Engine Auxiliary Components
12V Throttle Solenoid P12972 for Niftylift TD34/SD34/SD50 – Direct OEM Replacement
<p>Stop downtime caused by erratic throttle response or sudden engine stalling on your Niftylift — this <strong>12V Throttle Solenoid P12972</strong> delivers OEM-matched precision and immediate throttle control restoration. Built to the same 12V DC pull-in voltage and 0.8A holding current specs as the original, it eliminates guesswork when replacing worn or failed units across high-cycle machines like the TD34, SD34, and SD50.</p> <ul> <li>Fits 12+ Niftylift models including HR17D, HR21D, NL210, and trailer-mount variants — no adapter kits needed</li> <li>Direct drop-in replacement for P12972, 1502ES-12C7U1B1, and ES1502C-12V T20 — verified against factory pinout and stroke length</li> <li>ISO-certified coil winding and IP65-rated housing withstand daily washdowns and hydraulic mist exposure</li> <li>Ships from Guangzhou warehouse in 2–5 working days — <strong>MOQ just 1 piece</strong>, even for urgent field repairs</li> </ul>
Engine Auxiliary Components
12V Fuel Shutdown Solenoid 119233-77932 for Yanmar 3TNE84/3TNV88 Engines
<p>Stop unexpected engine shutdowns and restore reliable fuel cutoff control — especially critical during high-load operation or emergency stops. This <strong>12V fuel solenoid</strong> is a direct-fit, OEM-equivalent replacement for Yanmar 3TNE84 and 3TNV88 engines, eliminating the risk of counterfeit parts that fail mid-shift or cause hard-starting due to inconsistent coil resistance.</p> <ul> <li>Fits 12+ Yanmar engine variants — including hard-to-match specs like 3TNV88-BPTB2 and 3TNE84-EIKS — verified against original winding impedance (12.8–13.4Ω @ 20°C)</li> <li>Also replaces in Takeuchi TB235, Hyundai R60-5, and select John Deere tractor applications — no adapters or wiring mods needed</li> <li>Pre-tested for 100% duty-cycle hold performance at 12.0V ±0.2V, matching Yanmar’s OEM thermal derating curve</li> <li>Ships same-day from Guangzhou warehouse — no waiting weeks for OEM backorders</li> </ul>
Engine Auxiliary Components
12V Stop Solenoid 3991167 for Cummins 4BT – Direct Replacement for Hyundai R130/R170
<p>Stop engine shutdowns before they cost you downtime — this <strong>12V stop solenoid 3991167 for Cummins 4BT</strong> delivers OEM-equivalent response time and holding force, so your Hyundai R130 or R170 cuts power cleanly every time.</p> <ul> <li>Fits Cummins 4BT engines without modification — no adapter plates or wiring hacks needed</li> <li>Verified 12V DC pull-in voltage (±0.5V) and 1.8A hold current — critical for reliable shutoff in high-heat cab environments</li> <li>Replaces 3991167, SA-4941-12, and 3964627 with identical mounting footprint and solenoid stroke length</li> <li>Ships from Guangzhou warehouse same day — no waiting weeks for OEM backorders</li> </ul>
Engine Auxiliary Components
12V Fuel Stop Solenoid 16851-60014 for Kubota RTV900 – Direct OEM Replacement
<p>Stop unexpected engine shutdowns and get your Kubota RTV900 back in service—fast. This <strong>12V fuel solenoid</strong> delivers OEM-equivalent reliability with precise 12V DC actuation timing, eliminating the hesitation or delayed cutoff that causes hard starts and stalling on aging RTV900 models.</p> <ul> <li>Fits 22+ RTV900 variants—including hard-to-match submodels like RTV900W6SE, RTV900T5-T2, and RTV900XTW—no guesswork needed</li> <li>Direct replacement for <strong>16851-60014</strong> and 15+ legacy numbers (052600-4530, 16851-60015, etc.), so you won’t get stuck with mismatched parts mid-repair</li> <li>Built with dual-seal plunger design—critical for preventing fuel leakage past the solenoid body, a common failure point in high-hour utility vehicles</li> <li>Tested to 100,000-cycle life under real-world voltage fluctuation (10.5–14.2V), not just lab-rated specs</li> </ul>
Engine Auxiliary Components
12V fuel shut-off solenoid SBA185206083 for Shibaura ISM N844 engines
<p>Stop unexpected engine shutdowns and get reliable, instant fuel cutoff every time — especially during critical operations or emergency stops. This <strong>12V fuel shut-off solenoid</strong> is engineered as a direct drop-in replacement for Shibaura ISM N844 engines, eliminating guesswork and compatibility headaches you’ve faced with mismatched or counterfeit solenoids.</p> <ul> <li>Fits New Holland TC30, TC24D, Boomer 3045, T2320, and 50+ other models — verified against OEM pinout, stroke length, and coil resistance (12.8Ω ±5%)</li> <li>Replaces 15+ part numbers including SBA185206083, 185206080–185206085, and 281552A1 — no adapter kits or wiring mods needed</li> <li>Built with high-temp EPDM seals and copper-clad aluminum windings to withstand continuous duty cycles in hot engine bays</li> <li>Ships same-day from our Guangzhou warehouse — no 2–4 week OEM delays or inflated pricing</li> </ul>
Engine Auxiliary Components
12V Shutoff Solenoid Valve for Kubota D722/D782/D902 – Direct OEM Replacement
<p>Stop unexpected engine shutdowns and get reliable, instant fuel cutoff every time — this <strong>12V shutoff solenoid valve</strong> delivers OEM-equivalent response speed and durability for Kubota D722, D782, and D902 engines. No more guessing whether your KX018-4 or U17 excavator will stall mid-operation due to weak coil pull-in force or inconsistent armature travel.</p> <ul> <li>Fits verified models: KX018-4, KX41-3, U15, U17, SCL1000, K008-5 — no adapter kits needed</li> <li>Direct replacement for 1G820-60022, 1G820-60012, and 1G820-60020 — same mounting footprint and electrical interface</li> <li>Coil resistance calibrated to 12.8–13.4Ω at 20°C — critical for stable engagement under low-battery cranking conditions</li> <li>Backed by our 6-month warranty and real-time technical support from Kubota hydraulic & engine specialists</li> </ul>
Engine Auxiliary Components
12V fuel shut-off solenoid for CAT 3013C/3024C – direct OEM replacement
<p>Stop unexpected engine shutdowns and get back to work fast with this <strong>12V fuel shut-off solenoid</strong> — a direct OEM replacement that delivers instant, reliable fuel cutoff for CAT 3013C and 3024C engines. No more hunting for compatible parts across multiple suppliers or risking downtime with inconsistent aftermarket units.</p> <ul> <li>Fits CAT loaders (247B, 257B, 216B2) and vibratory compactors (CB-334E, CB-225E) without modification</li> <li>Verified drop-in replacement for <strong>365-3339 and 217-5204</strong> — includes correct coil resistance (≈12Ω @ 20°C) and plunger stroke depth for precise valve actuation</li> <li>Pre-tested for 100% magnetic pull-in force and leak-free sealing — critical for preventing post-shutdown fuel dribble that causes hard starts</li> <li>Ships same-day from our Guangzhou warehouse when ordered before 3 PM CST — no waiting weeks for OEM lead times</li> </ul>
Engine Auxiliary Components
12V Fuel Shutoff Solenoid for Kubota D905–V1505T Engines – OEM Replacement
<p>Stop unexpected engine shutdowns and get reliable, instant fuel cutoff every time — especially during critical operations or emergency stops. This <strong>12V fuel shutoff solenoid for Kubota D905–V1505T engines</strong> delivers OEM-equivalent performance without the OEM wait times or markup.</p> <ul> <li>Fits Kubota’s 05-series engines — including the notoriously tight-tolerance D905 and V1505T — with precise 12V pull-in and hold-in specs (12V/3.5A pull, 12V/1.2A hold) that prevent coil burnout under continuous duty</li> <li>Direct replacement for 17454-60010 and 12+ cross-references — no guesswork, no mismatched wiring harnesses</li> <li>Built with high-temp silicone seals and copper-clad steel armatures to withstand diesel heat cycles and vibration in B2400D, F2560, and other high-hour tractor applications</li> <li>Ships same-day from Guangzhou warehouse — no backorders, no counterfeit risk, and full technical verification before dispatch</li> </ul>
Engine Auxiliary Components
12V Fuel Injection Pump Shutoff Solenoid for Perkins, John Deere & GM Engines – Direct Replacement
<p>Stop unexpected shutdowns and get your Perkins, John Deere, or GM engine back online fast — without waiting weeks for OEM parts or risking downtime from unreliable replacements. This <strong>12V fuel shutoff solenoid</strong> delivers instant, positive fuel cutoff on mechanical injection pumps, just like the original — but with ISO-certified consistency and 3–12 month warranty coverage.</p> <ul> <li>Fits critical engines including Perkins 1004-40T & 1006-6T, John Deere 4239/6466 series, and GM 6.5L diesel — verified against RE62240, RE37089, AR90340, and AR48219 cross-references</li> <li>Direct plug-and-play replacement — no wiring adapters or pump recalibration needed (unlike aftermarket solenoids with mismatched pull-in/hold-in coil specs)</li> <li>Stocked in our Guangzhou warehouse: ship same day for urgent repairs, MOQ just 1 piece</li> <li>Tested at 12.8V cold-crank voltage to ensure reliable engagement even in low-battery field conditions</li> </ul>