Product Specifications
| Parameter | Details |
|---|
| Part Name | Rubber Isolator Shock Mount |
| Part Number (OEM Reference) | TRSA000008038, SW-180100, SW180100 |
| Brand Compatibility | Stanley, Bobcat, Doosan, and other vibratory plate compactors |
| Machine Model Fitment | Stanley HS6000, HS6019, HS6100, HSX6, HS8000, HS11000, HSX11; Bobcat PCF64; Doosan vibratory plate compactors |
| Material | Natural rubber compound with high damping coefficient |
| Quantity per Set | 4 pieces |
| Condition | New aftermarket |
| Warranty | 6-month warranty against manufacturing defects |
| Packaging | Individual protective plastic sleeve + corrugated cardboard box with foam insert |
Compatible Models
| Brand | Applicable Models |
|---|
| Stanley | HS6000, HS6019, HS6100, HSX6, HS8000, HS11000, HSX11 |
| Bobcat | PCF64 |
| Doosan | Vibratory plate compactors (generic fit per TRSA000008038 specification) |
Tired of Excessive Vibration Damage on Your Stanley HS6000 or Bobcat PCF64?
Every hour your vibratory plate compactor is down due to cracked mounts or uncontrolled vibration means lost labor, delayed site handover, and potential damage to adjacent equipment. OEM replacements take 3–4 weeks and cost up to 45% more — while counterfeit rubber isolators fail within 3 months under field conditions, causing secondary failures in engine mounts and control linkages.
OEM-Equivalent Quality, Ready to Ship from Guangzhou Warehouse
Engineered for exact dimensional and dynamic equivalence to TRSA000008038 and SW-180100, these Stanley vibratory plate compactor rubber isolators are produced in ISO 9001-certified factories and tested for compression set, tensile strength, and fatigue life before shipment. With 10 years’ experience supplying vibration dampening mounts globally, XUNPO delivers consistent performance across Stanley HS6000, Bobcat PCF64, and Doosan compactors — no re-engineering, no trial-and-error.
Where This Part Works
This vibration dampening mount operates under continuous cyclic loading on construction sites, municipal road projects, and utility trench backfilling where compaction frequency exceeds 2,200 vpm and surface temperatures range from –10°C to +70°C. It prevents transmission of destructive resonance between the hydraulic motor and chassis frame — critical in confined urban spaces where noise and structural feedback affect operator safety and nearby structures. A failed mount directly increases bearing wear in the drive system and accelerates fatigue cracking in mounting brackets.
Engineering Details That Matter
The natural rubber compound uses a 65±3 Shore A hardness formulation — calibrated to absorb peak shock loads up to 4.2 kN without permanent deformation. Unlike generic black rubber, this material contains anti-ozone and UV stabilizers proven effective after 1,200 hours of accelerated aging testing. Each isolator undergoes 100% visual inspection for voids, flash, and bond integrity between rubber and metal inserts. Dimensional tolerances are held to ±0.3 mm on inner/outer diameters and ±0.5 mm on height — ensuring direct interchangeability with original TRSA000008038 and SW-180100 units without shimming or modification.
The Real Cost of Wrong Parts
A $12 counterfeit isolator may save $8 upfront — but causes premature failure of adjacent components: cracked mounting plates (+$185 repair), misaligned drive shafts (+$220 realignment labor), and increased operator fatigue leading to higher incident rates. Industry data shows improper vibration isolation accounts for 23% of unplanned downtime in plate compactor fleets. Using ISO-compliant parts reduces total cost of ownership (TCO) by 31% over 24 months — not because they’re cheaper, but because they eliminate repeat service calls, extend chassis life, and maintain compaction consistency per ASTM D698 standards.
Why Customers Trust XUNPO
— We source only from ISO 9001-certified rubber component factories, with incoming material batch testing for durometer, elongation, and compression set.
— Every shock mount undergoes dynamic load cycling test (5,000 cycles at rated amplitude) before packing.
— 6-month warranty covers replacement or refund for any manufacturing defect — no restocking fees.
— 10 years exporting to 120+ countries: verified purchase records from distributors in USA, Germany, UAE, Brazil, and Australia.
— 20+ technical staff trained in compaction equipment mechanics — part verification response within 2 hours.
— Guangzhou warehouse holds 10,000+ SKUs including 42 rubber isolator variants — all Stanley HS6000 shock mount sets shipped within 2–5 working days.
Packaging & Shipping
- Each set of 4 isolators packed in individual plastic sleeves, secured in custom-cut EPE foam, and sealed in a reinforced 3-layer corrugated box (320 × 220 × 110 mm).
- In-stock items ship within 2–5 working days after order confirmation.
- Flexible logistics: Express (DHL/FedEx/UPS), air freight, or sea freight — quoted based on destination and urgency.
- Real-time tracking number provided upon dispatch; delivery updates sent automatically.
- Minimum order quantity: 1 set (4 pieces) — supports urgent field repairs and small fleet operators.
Get Your Stanley HS6000 Shock Mounts Now
Your compactor shouldn’t wait weeks for OEM parts — especially when downtime costs $1,200–$2,800 per day on average. Send us your machine model (e.g., Stanley HS6000), required quantity, and destination country. We’ll reply with full pricing, shipping options, and lead time within 24 hours. First-time buyers can request a sample set for physical verification before bulk ordering.
Frequently Asked Questions
Q: Is this an original Stanley part or an aftermarket replacement?
A: This is an OEM-equivalent aftermarket part manufactured in ISO 9001-certified facilities to match TRSA000008038 and SW-180100 specifications — not sourced from Stanley’s supply chain.
Q: How do I confirm compatibility with my specific machine?
A: Provide your exact machine model (e.g., Stanley HS6019 or Bobcat PCF64) and we’ll verify fitment using our cross-reference database — response guaranteed within 2 hours.
Q: What is the warranty coverage?
A: 6-month warranty against manufacturing defects — includes free replacement or refund with return shipping covered if defective.
Q: What is the minimum order quantity?
A: 1 set (4 pieces) — no exceptions. Supports emergency maintenance and small-scale contractors.
Q: How fast can I receive the parts?
A: In-stock orders ship within 2–5 working days from Guangzhou. Express delivery reaches most North American/European destinations in 4–7 business days.
Q: Can I get a sample before placing a bulk order?
A: Yes — first-time customers may request one sample set (4 pieces) for physical evaluation. Sample fee is fully credited toward your first bulk order.
Ready to order or need a quote?
Send your part number, machine model, and quantity — we'll respond within 24 hours.
WhatsApp: +86 187 2205 7128 | Email: talos@xunpojx.com
