Cylinder Components
Cylinder Head Gasket Kit Replacement for Kubota D782 System-Matched
<p>Overhaul kit contents cross-checked against your specific D782 build history before shipment.</p>
View Details
<p><strong>1G772-99350, 1G772-99360 Overhaul Gasket Kit</strong> compatible with Kubota V3307, V3307T, V3307-DI engines — MLS cylinder head gasket with 0.15 mm thickness tolerance, NBR valve cover and oil pan gaskets rated -40°C/+120°C.</p> <ul> <li>Matched sealing set addresses the full cylinder system: head, timing cover with integrated crankshaft seal lip at 0.08 mm interference fit, and oil pan — sized to suit your engine's rebuild history and oversize conditions.</li> <li>Fits KX080-3, KX080-4, SSV75, M6040, M6060, M7060 series machinery.</li> </ul> <p>Overhaul kit contents verified item-by-item before dispatch.</p>
MOQ
1 Piece
Lead Time
2-5 Business Days
Shipping
120+ Countries
Warranty
3-12 Months
Compatible Brands
Q: What specific gaskets and seals are included in this overhaul kit? A: The kit contains the MLS cylinder head gasket, NBR valve cover gasket, oil pan gasket, timing cover gasket with integrated crankshaft seal lip, thermostat housing gasket, and water pump gasket. Each component is listed on the cross-reference sheet provided with shipment, mapped to the specific V3307 engine variant you confirm at order time.
Q: Are the gaskets interchangeable between V3307, V3307T, and V3307-DI? A: No. The turbocharged V3307T operates at higher peak cylinder pressure and sustained coolant temperature, requiring the MLS head gasket at its full 145 bar rating. The V3307-DI direct-injection variant may have different coolant passage geometry. We verify your exact engine serial number to ship the correct variant-specific kit.
Q: How do I choose gasket thickness if the head was resurfaced in a prior rebuild? A: Provide the machining record showing material removed from the deck surface. If resurfacing exceeded typical tolerance, a thicker head gasket may be needed to restore original compression ratio and maintain head bolt yield margin within specification. Our technical team calculates the required grade from your measurement data.
Q: What systemic faults should be investigated before installing a new head gasket? A: Coolant passage blockages, thermostat operation, head bolt torque verification, and deck flatness must all be confirmed. A localized hot spot from restricted coolant flow will destroy a new MLS gasket at the same cylinder position. We include a diagnostic checklist with every overhaul kit shipment.
Q: How can I confirm the correct kit using only my engine serial number? A: Submit the engine serial number and nameplate photograph if available. We cross-reference the build record to identify the exact gasket variant, seal dimensions, and any superseded part numbers. This verification is completed before the kit ships, preventing fitment surprises on the bench.
<p>Overhaul kit contents cross-checked against your specific D782 build history before shipment.</p>
View Details<p><strong>Engine Grade Overhaul Rebuild Kit for Kubota D902 – Matched Set</strong> — compatible with BX2360, BX25, RTV900, KX018-4 and other Kubota D902-powered machines. Includes full gasket set, pistons, rings, connecting rods, crankshaft, bearings, valves and seats in one matched assembly.</p> <ul> <li><strong>System-level rebuild supply</strong> — all cylinder and rotating components dimensionally matched to maintain compression, bearing clearance and valve timing across the entire D902 engine family, accounting for prior rebuild oversize history</li> <li>Rebuild kit contents verified item-by-item against your engine serial variant before dispatch</li> </ul>
View Details<p><strong>1G720-03311 Overhaul Gasket Kit</strong>, multi-layered steel head gasket with nitrile rubber oil pan gasket — supplied as a matched sealing set for Kubota D1703 and D1803 engine rebuilds, compatible with Bobcat 325C and 325D excavators. This kit addresses the complete cylinder sealing system, with all gaskets held to 0.02mm dimensional tolerance for proper alignment during reassembly. Engine serial variants within D1703/D1803 families may require different gasket profiles; confirming your build history prevents mismatches from prior rebuilds.</p> <ul> <li>Condition: New aftermarket, ISO 9001 production</li> <li>Warranty: 3–12 months against manufacturing defects</li> <li>MOQ: 1 piece</li> </ul> <p>Overhaul kit contents verified item by item against your engine serial before dispatch.</p>
View Details<p><strong>1G855-03042B Cylinder Head for Kubota V2403, Complete with Valves & Springs</strong> — engineered for V2403 engine overhauls in KX, L, MX and R series machines. This assembly features matched valve springs calibrated to original lift profiles, induction-hardened seats and precision-machined gasket surfaces for leak-free sealing during top-end rebuilds. Eliminates component mismatch when replacing cylinder heads across V2403 variants. Full overhaul kit contents verified against engine serial before dispatch.</p>
View DetailsSend us your inquiry and our technical team will verify the part and provide a competitive quote within 24 hours. MOQ starts from 1 piece.
Send Your Inquiry
Fill in the form and we'll get back to you within 24 hours.
