Lubrication & Cooling Systems
Water Pump 1E051-73036 for Kubota D722 D902 – Engine Grade
<p>Overhaul kit contents and matched tolerances verified before dispatch.</p>
View Details
<p>Stop downtime from coolant leaks and overheating—this <strong>Perkins water pump</strong> delivers OEM-equivalent sealing and flow performance for your 1104D-44T engine, backed by our 3–12 month warranty. Built with a precision-machined cast iron housing and high-temp silicone gasket pre-installed (no guesswork on torque specs or gasket alignment), it eliminates the risk of dry-run failure common with low-grade replacements.</p> <ul> <li>Fits Massey Ferguson 5460, Landini Vision 95, Manitou MT 1440 SLT, and 50+ other models—verified against Perkins’ official service bulletins</li> <li>Replaces 4131A062, 4225069M91, 707646A1, and 11 other cross-reference numbers—no more hunting across catalogs</li> <li>Ships same-day from our Guangzhou warehouse when ordered before 3 PM CST—critical for urgent field repairs</li> <li>Each unit undergoes dynamic pressure testing at 1.5× operating load to ensure impeller balance and bearing preload integrity</li> </ul>
MOQ
1 Piece
Lead Time
2-5 Business Days
Shipping
120+ Countries
Warranty
3-12 Months
Compatible Brands
| Parameter | Details |
|---|---|
| Part Name | Water Pump with Gasket |
| Part Number (OEM Reference) | 4131A062 |
| Brand Compatibility | Perkins, Massey Ferguson, Landini, Manitou, McCormick |
| Engine Fitment | Perkins 2160, 2200, 1000.3WTI, 1000.4WT, 1104A-44, 1104A-44T, 1104A-44TA, 1104C-44T, 1104C-44TA, 1104C-E44T, 1104C-E44TA, 1104D-44T, 1104D-44TA, 1104D-E44TA, A4.236, A4.248 |
| Tractor Fitment | Massey Ferguson 275–89410 series; Landini 6865–Vision 95 series; Manitou M-series to MRT/MV-series; McCormick C/F/MC/CX/V-series |
| Material | Cast iron housing, stainless steel impeller, nitrile rubber gasket |
| Condition | New Aftermarket |
| Warranty | 6-month standard warranty against manufacturing defects |
| Packaging | Individual cardboard box with molded EPS foam protection |
| Brand | Applicable Models |
|---|---|
| Massey Ferguson | 275, 290, 375, 390, 451, 471, 481, 491, 492, 533, 543, 563, 573, 583, 593, 596, 3425, 3435, 3445, 3455, 5425, 5435, 5445, 5455, 5460, 5460SA, 6445, 6455, 6460, 6470, 8925, 8926, 8947, 89410 |
| Landini | 6865, 7860, 8860, 8865, Ghibli 85/95/105, GlobalFarm 90/95/100/105, Mythos 105, PowerFarm 75/85/95/105, Rex 75F/GE/GT, 85F/GE/GT, 95F/GE/GT, 105F/GE/GT, Technofarm 75 (EU), Trekker 75F/M, 85C/F/M, 95C/F/M, 105C/F/M, Vigneti 75V/85V, Vision 85/95/105 |
| Manitou | M 30.4, M 50.4, MC 30, MC 40 PS, MC 50 PS, MI 60 H, MI 70 H, MLA 628 T 120 LSU PS, MLA 628 TW LS 120 PS, MLT 1035 LT LSU, MLT 627 T 20" MU, MLT 627 T 24" MU, MLT 627 TMU C, MLT 634 T LSU, MLT 634-120 LSU PS, MLT 731 T LSU, MLT 735-120 LSU, MLT 735-120 LSU PS, MLT 741-120 LSU PS, MLT 742 H T LSU, MLT 742 T, MLT 845 H T LSU, MLT 845-120 LSU, MLT 940 L 120 LSU, MLT 940 L 120 LSU TUV, MLT 940-120 H LSU, MRE 2440 EPS, MRT 1432 M 400i, MRT 1542 M 400i, MRT 1542 M CR, MRT 1635 M 400i, MRT 1742 M 400i, MRT 1742 M RC, MRT 1850 M RC, MRT 2150 M RC, MRT 2440 EPS, MRT 2540 M RC, MSI 40 H, MSI 50 H, MT 1030 S/Evolution, MT 1033 HLT, MT 1335 H SLT, MT 1335 SL, MT 1340 SLT, MT 1435 H SLT, MT 1435 SL, MT 1435 SLT, MT 1436 R Privilege, MT 1440 EP/H/HA/Privilege/SLT/SLT Ultra, MT 1740 SLT, MT 1745 H SLT Ultra, MT 1840 EP/H/R Privilege, MT 732/Evolution, MT 932/Evolution, MHT 780 T, MHT 860 LT LSU Evolution, MVT 628 T, MVT 665 T, MVT 675 T, MVT 730 |
| McCormick | C105Max, C60Max, C75Max, C85Max, C95Max, F105, F60, F70, F75, F80, F85, F95, MC120, MC135, MC95, MC105, MC115, V75, V80, V85, CX105, CX75, CX85, CX95 |
When a water pump fails on a Massey Ferguson 5460 tractor or a Manitou MLT 742 during peak harvest or site grading, every hour of downtime costs hundreds — even thousands — in lost productivity, labor, and contractual penalties. Many operators report repeated failures after installing low-cost pumps with mismatched impeller geometry or substandard gaskets. Others wait weeks for OEM parts only to find they’ve been quoted 40% above market rate — and still risk counterfeit casting flaws.
This Perkins water pump 4131A062 is manufactured in ISO 9001-certified facilities and undergoes full-flow bench testing before shipment — verifying pressure delivery, seal integrity, and bearing preload at rated RPM. Built for Perkins 1104D-44T engines in high-duty-cycle applications like agricultural tillage and material handling, it delivers consistent coolant circulation without cavitation or leakage. With 10 years of global export experience and 10,000+ SKUs in stock, XUNPO ensures rapid replacement for critical engine cooling systems.
This water pump operates under continuous thermal cycling in demanding environments: grain harvesting in Southeast Asia, quarry loading in South Africa, port container stacking in Rotterdam, and demolition work in Dubai. It maintains stable coolant flow at 2,200 RPM across ambient temperatures from -20°C to +50°C while resisting corrosion from urea-based DEF exposure and road-salt-laden air. Its compatibility across Massey Ferguson, Landini, and Manitou platforms means fleet managers can simplify inventory — one part replaces multiple legacy numbers across brands.
The cast iron housing meets ASTM A48 Class 30B tensile strength requirements, ensuring dimensional stability under thermal expansion. Stainless steel impeller blades are precision-balanced to ISO 1940 G2.5 tolerance, minimizing vibration-induced bearing wear. The integrated nitrile rubber gasket resists swelling in ethylene glycol coolant mixtures up to 65% concentration and maintains sealing force after 500 thermal cycles. All machined surfaces conform to ISO 2768-mK general tolerances, guaranteeing drop-in fit without shimming or reaming. Surface finish on the shaft seal seat is Ra ≤ 0.8 μm — critical for preventing premature mechanical seal failure.
A $35 counterfeit water pump may save $20 upfront but often fails within 200 operating hours — triggering overheating, head gasket damage, and cylinder liner scoring. Repair labor alone exceeds $450, not counting lost field time. In contrast, this 4131A062 water pump with gasket for Perkins 1104D-44T is validated to ISO 3046-1 engine cooling performance standards and carries a documented 6-month warranty. Total cost of ownership drops by 37% over 2,000 hours when factoring in reliability, service life, and avoided secondary damage. This is the Perkins 1104D water pump that meets real-world durability expectations — not just catalog specs.
We source exclusively from ISO 9001-certified factories and inspect every incoming batch for material certification, casting porosity, and dimensional compliance. Each unit undergoes 100% functional testing on calibrated flow-pressure rigs before packing. We offer 6-month warranty coverage for manufacturing defects — no questions asked. Our team has supported excavator and tractor operators in 120+ countries since 2016. With 20+ technical specialists on staff, we verify part fitment within 2 business hours using OEM service manuals and cross-reference databases. And because our Guangzhou warehouse holds over 10,000 SKUs, your 4131A062 water pump ships in 2–5 working days — no backorders, no delays.
Your Massey Ferguson 5460 won’t wait — and neither should your repair plan. Every day of downtime adds direct cost and erodes client trust. Send us your part number, machine model, and required quantity — we’ll email a competitive quote within 24 hours. First-time buyers can request a sample for physical verification and bench testing before placing bulk orders. Stock is ready. Support is immediate.
Q: Is this an original Perkins part or an aftermarket replacement?
A: This is an OEM-equivalent aftermarket water pump, produced in ISO 9001-certified factories to match Perkins 4131A062 specifications for fit, form, and function.
Q: How do I confirm if this fits my specific tractor or engine?
A: Provide your exact machine model (e.g., Massey Ferguson 5460) and/or engine serial number — our technical team confirms compatibility within 2 hours using OEM service documentation.
Q: What is the warranty period?
A: 6 months from date of delivery against manufacturing defects. Claims require photo evidence and brief failure description.
Q: What is the minimum order quantity?
A: 1 piece. No volume requirement — ideal for emergency replacements and small workshops.
Q: How fast can you ship?
A: In-stock items ship within 2–5 working days from our Guangzhou warehouse. Express options deliver to most destinations in 3–7 business days.
Q: Can I receive a sample before ordering in bulk?
A: Yes — first-time customers may request one sample for evaluation and performance testing prior to bulk purchase.
Ready to order or need a quote?
Send your part number, machine model, and quantity — we'll respond within 24 hours.
WhatsApp: +86 187 2205 7128 | Email: talos@xunpojx.com
<p>Overhaul kit contents and matched tolerances verified before dispatch.</p>
View Details<p><strong>1G772-73032 Water Pump</strong> for Kubota V3307, V3307-DI, and V3307T engine cooling system rebuilds, featuring high-silicon aluminum impeller and carbon-ceramic mechanical seal rated to 120°C.</p> <ul> <li>Supplied as part of a matched cooling system refresh — pair with thermostat, gaskets, and hoses to address root-cause overheating rather than swapping the pump alone.</li> <li>Overhaul gasket contents and port orientation verified against engine serial prefix before dispatch.</li> </ul>
View Details<p><strong>Oil Pump 16851-35012 for Kubota D722/D902, NBR Gasket, ±0.02 mm Tolerance</strong> — replacement for Kubota D722, D902 and 30+ engine variants across BX, RTV, ZD, KX and GR series.</p> <ul> <li>System-matched lubrication components ensure correct flow and pressure for matched bearing clearances during overhaul</li> <li>Verify prior rebuild history to confirm crankshaft regrind and oversize grades before ordering</li> </ul> <p>Overhaul kit contents verified item-by-item before dispatch.</p>
View Details<p>Stop overheating delays and get your Kubota back in service fast — this <strong>Kubota water pump</strong> delivers OEM-equivalent cooling performance without the 3–4 week wait or 40% markup. Built to exact D722/D902 engine tolerances, it features the critical internal impeller vane geometry that prevents cavitation-induced flow drop at high RPM — a common failure point in generic replacements.</p> <ul> <li>Fits BX1880, RTV-X900G, ZD1011, GR2120-2, SCL1000 and more — verified against Kubota’s latest service bulletins</li> <li>Includes genuine-spec gasket 16871-73430 (not just “compatible”) for leak-free sealing on aged engine blocks</li> <li>Pre-tested for shaft runout ≤0.05mm — eliminates premature bearing wear seen in off-spec units</li> <li>Ships same-day from our Guangzhou warehouse — no minimum order, no waiting for production batches</li> </ul>
View DetailsSend us your inquiry and our technical team will verify the part and provide a competitive quote within 24 hours. MOQ starts from 1 piece.
Send Your Inquiry
Fill in the form and we'll get back to you within 24 hours.
