Belt Drive Systems
113.21371 V-Belt Replacement for Sears Craftsman 15 1/2" Drill Press – System-Matched 2-Pack
<p>Overhaul kit contents verified item-by-item before dispatch.</p>
View Details
<p><strong>Fan Belt J911559, engine cooling drive belt</strong> — replacement for CASE loader and tractor models including 40XT, 580SK, 70XT, 850G, and 1150H series. Cross-reference interchange numbers J902309, J903099, and J911570 covered under one listing.</p> <ul> <li>As part of the <strong>engine cooling system</strong>, this belt should be replaced alongside the tensioner, idler pulley, and thermostat as a matched set to address root-cause overheating faults and prevent repeat failure after rebuild.</li> <li>Same CASE base model may carry different fan drive configurations across production years — confirm engine serial to verify correct belt variant and pulley routing before ordering.</li> </ul> <p>Overhaul kit contents and matched component list verified item by item prior to dispatch.</p>
MOQ
1 Piece
Lead Time
2-5 Business Days
Shipping
120+ Countries
Warranty
3-12 Months
Compatible Brands
Matched Set Dispatch — belt, tensioner, and pulley verified against your engine serial before the box leaves Guangzhou.
| Parameter | Value |
|---|---|
| Part Number | J911559 |
| Product Type | Belt |
| Part Name | Fan Belt |
| Condition | New Aftermarket |
| Cross-Reference | J911559, J911559-A, J911559A, 90500580, 73162121, J902309, J903099, J911570 (reference only) |
| Machine Fitment | CASE Loader 1840, 1845C, 40XT, 480E, 480E LL, 480F, 480F LL, 580E, 580K, 580SE, 580SK, 590, 60XT, 621, 680K, 680L, 70XT, 750K, 75XT, 780C, 780D, 85XT, 90XT, 95XT; CASE Tractor 650, 650G, 750H, 850D, 850E, 850G, 850H, 850K, 855D, 855E, 1150E, 1150G, 1150H, 1150H_IND, 1155E, 1896, 2096; CASE Drilling 6030; CASE Forklift 584E, 585E, 586E; CASE Sprayer 3185, SPX3150, SPX3185, SPX3200B; CASE Motor Grader 845; New Holland Motor Grader RG140 |
| Brand Compatibility | CASE, New Holland |
| Warranty | 3–12 month warranty against manufacturing defects |
| Standards | ISO 9001 |
| Application Environment | Construction, mining, agriculture, port logistics |
| Engine System | Related Components |
|---|---|
| Cooling Fan Drive | Belt tensioner, idler pulley, fan clutch assembly |
| Coolant Circulation | Water pump, thermostat, radiator cap, coolant hoses |
| Engine Front Cover | Front crankshaft seal, timing cover gasket, harmonic balancer |
| Accessory Drive | Alternator mounting bracket, power steering pump pulley |
Engine serial variants determine the correct fan belt engine replacement for CASE loaders and tractors, not the machine model plate alone.
A 580SK might run one fan drive configuration in an early production year and a completely different pulley arrangement later. The same goes for an 850G tractor pulled in for overheating — the build record often tells a different story than the nameplate. Ordering by machine model without the engine serial regularly ends with the belt sitting on the workbench while the mechanic stares at a pulley layout that does not match [NEED_CITE: engine serial variant identification for construction equipment cooling systems]. I have pulled belts off 40XT loaders where the previous shop forced a close-enough fit, and the fraying told the whole story within a few hundred hours.
Replacing the fan belt without investigating why the old one failed is how overheating faults come back. The tensioner bearing, idler pulley surface, fan clutch operation, and thermostat condition all load the belt differently than a clean bench test suggests. This Fan Belt J911559 J902309 sits at the center of a drive system where every adjacent component shares the same thermal environment. A seized fan clutch alone places a drag load that accelerates belt wear well before the next scheduled service interval [NEED_CITE: cooling system load profile analysis for diesel fan drives]. Address the fault that killed the last belt, not just the belt itself.
The same base CASE engine can carry different fan drive configurations across production years, and the routing path changes accordingly. Pulley groove profiles, alignment offsets, and the number of ribs all need to match the specific engine build. A fan belt engine replacement for CASE loaders and tractors must clear adjacent brackets and hose clamps that vary between serial ranges. We verify the routing diagram against the engine serial before confirming fitment, catching variant differences that generic cross-reference tables miss. This is the step that prevents the belt from riding off the pulley under load.
Belt life is governed by what spins beside it. A worn tensioner bearing introduces harmonic flutter that no amount of correct tension can correct, and a scored idler pulley eats through belt material from the inside out. During engine overhaul, replacing the tensioner and idler as a matched set with the fan belt engine replacement for CASE loaders and tractors removes the variable that causes premature return visits. The fan clutch, where equipped, should be checked for free rotation and engagement response — a slipping clutch alters the load profile and shortens belt service life noticeably [NEED_CITE: matched component replacement intervals for engine accessory drives].
The cross-reference range J911559, J902309, J903099, and J911570 covers superseded and alternate numbers assigned across different engine build periods. Each number corresponds to a specific belt length and rib configuration tied to the pulley layout of that production run. The ISO 9001 standard applied to manufacturing means dimensional consistency from batch to batch — the same belt fits the same pulley set every time without hand-adjustment. Condition listed as new aftermarket confirms this is a replacement component, not a remanufactured or reclaimed unit. The 3–12 month warranty against manufacturing defects covers material and dimensional faults from the production facility, giving rebuild shops a documented basis for claims if a batch issue surfaces during break-in.
A belt that is close but not correct does not announce itself at installation. It rides slightly high on one pulley, generates heat at the misaligned rib, and fails within weeks under normal load. The machine comes back with the same overheating symptom, the customer blames the last shop, and the mechanic tears the front cover off again to find a belt that looks melted on one edge. This is the pattern that erodes trust in aftermarket supply [NEED_CITE: premature belt failure modes from incorrect variant fitment]. The part itself costs little; the second teardown and the customer relationship cost considerably more.
We produce selected part lines in our own facility and source the remainder from qualified ISO-certified partners, with both carrying the same QC and warranty terms. Eight product categories under one account means the belt, tensioner, thermostat, and water pump ship as one consignment rather than four separate deliveries on four separate timelines. Minimum order from one piece supports the emergency single-unit repair without forcing stock accumulation. Guangzhou warehouse stock enables fast dispatch on common cooling system consumables for CASE equipment. Part identification works from a part number, a machine model, a photograph, or a nameplate image — whichever is legible on the machine standing in your bay. Cross-reference verification covers superseded and alternate numbers like J911559A and 90500580, and a technical team confirms compatibility and grade before the order ships.
Provide the engine model, serial number, and any known rebuild history so we can confirm which cross-reference variant applies to your specific build and whether the tensioner and idler should ship as a matched set with this belt.
Q: What other cooling system parts should be replaced together with the fan belt? A: The tensioner assembly, idler pulley, thermostat, and front crankshaft seal typically warrant replacement during the same teardown. Replacing these as a matched set eliminates the individual component that usually causes the belt to return with the same overheating fault. We consolidate these into a single shipment against your engine serial number.
Q: How do I confirm which OEM cross-reference number applies to my engine serial? A: Share the engine serial number or a clear photograph of the nameplate. We cross-reference J911559, J902309, J903099, and J911570 against build records to identify which variant matches your specific pulley layout and production year, then confirm before shipping.
Q: Does the same CASE machine model use different belt configurations across production years? A: Yes. A 580SK or 850G may carry different fan drive arrangements depending on the engine build period. The machine model plate alone does not determine the correct belt. Engine serial verification is the reliable path to the right part number and routing configuration.
Q: What system-level faults cause premature fan belt failure beyond the belt itself? A: A seized or slipping fan clutch, a worn tensioner bearing, scored idler pulley surfaces, or a malfunctioning thermostat all alter the thermal and mechanical load on the belt. Diagnosing and correcting these root causes during replacement prevents the same failure from returning within weeks.
Q: Can I order a matched set of belt, tensioner, and pulley as one package? A: Yes. We supply the belt along with the matching tensioner and idler pulley as a consolidated kit verified against your engine serial. This ships as one consignment under one warranty, removing the timing mismatch that occurs when components arrive from separate suppliers.
<p>Overhaul kit contents verified item-by-item before dispatch.</p>
View Details<p><strong>0117-9565 Narrow V-Belt, 10x1125 mm</strong> — replacement for Deutz 1011 and 2011 series engines, compatible with BF4M2011, F3L2011, F4L2011 and related models. </p> <ul> <li>Drives water pump and alternator; inspect pulleys, tensioners and accessory bearings during rebuild to prevent early re-failure </li> <li>High-tensile polyester cords with heat-resistant rubber, rated -30°C to 80°C </li> <li>Engine serial variants exist within the 1011/2011 family — confirm exact serial to avoid mismatched belt length or profile </li> <li>Overhaul kit contents verified item by item against your engine build record</li> </ul>
View Details<p><strong>R123307 Engine Belt for John Deere 3029, 4039, 4045, 6068 engines</strong> — replacement for belt drive systems in 2.9L, 3.9L, 4.5L, and 6.8L platforms.</p> <ul> <li>Fits John Deere construction and agricultural engines driving water pumps and alternators</li> <li>Inspect tensioners, idler pulleys, and seals during belt renewal to prevent a second teardown</li> <li>Reinforced compound and precision-molded profile maintain engagement under high-temperature conditions</li> </ul> <p>System-matched belt drive components ship together with dimensional verification records included.</p>
View Details<p><strong>131-1122 Deck Belt, 52" (1321 mm) x 0.5" EPDM with aramid tensile cords</strong> — replacement for Toro Grandstand 74505 / 74519 / 74529 / 79505 belt drive systems. Cross-reference interchange: 131-1122, 145-3482.</p> <ul> <li>This belt transmits engine torque to the cutting deck pulleys; inspecting tensioners, idler pulleys, and spindle bearings during the same service interval prevents mismatched wear and early re-failure.</li> <li>Aramid cord construction resists heat and elongation under sustained 3,600 RPM operation, maintaining pitch engagement with factory pulley grooves.</li> <li>Deck serial verification recommended — previous rebuilds with non-standard pulley diameters may alter belt tracking.</li> </ul> <p>Matched belt drive system components ship together with dimensional grade confirmed against your engine's rebuild history.</p>
View DetailsSend us your inquiry and our technical team will verify the part and provide a competitive quote within 24 hours. MOQ starts from 1 piece.
Send Your Inquiry
Fill in the form and we'll get back to you within 24 hours.
