Block & Internal Parts
Connecting Rod for Kubota D650-V1200 Engine – Overhaul Component
<p>Oversize and undersize grades confirmed against crankshaft measurement before matched set dispatch.</p>
View Details
<p><strong>Connecting Rod for Kubota V3307 V3307T Engine</strong>, forged 4340 alloy steel, shot peened surface, dowel-pin big-end registration — replacement for Kubota V3307, V3307T, V3307-DI, V3307-DI-TE3 and Tier 4 variants powering mini-excavators, skid-steer loaders and compact telehandlers.</p> <ul> <li>Matched oversize grade (STD / 0.25 / 0.50) verified against crankshaft regrind history; con rod bearing shells and main bearings supplied as a matched set to the same grade to prevent premature failure after rebuild.</li> <li>Piston-to-pin bore clearance and overhaul gasket contents cross-checked against the specific V3307 variant before dispatch, ensuring no missing seals or mismatched components.</li> </ul> <p>Quality inspection record and dynamic balancing report ship with every order; matched rod, piston and bearing sets available for full-overhaul consolidation.</p>
MOQ
1 Piece
Lead Time
2-5 Business Days
Shipping
120+ Countries
Warranty
3-12 Months
Compatible Brands
Matched-Grade Supply — Connecting rod and bearing shells verified against crankshaft regrind history before dispatch.
| Parameter | Value |
|---|---|
| Product Type | Connecting Rod |
| Machine Fitment | Kubota V3307, V3307T, V3307-DI, V3307-DI-TE3, V3307-CR-TE4-SL2 TIER4, V3307-CR-TE4-SL2-Q TIER4 |
| Material | Forged 4340 Alloy Steel |
| Surface Treatment | Shot Peening |
| Big-End Registration | Dowel-Pin Registration |
| Oversize Grades | Available in STD, 0.25, and 0.50 |
| Condition | New Aftermarket |
| Warranty | 6 Months Against Manufacturing Defects |
| MOQ | 1 Piece |
| Quality Standard | ISO 9001 |
| Engine System | Related Components |
|---|---|
| Rotating Assembly (Bottom End) | Main Bearings, Crankshaft, Thrust Washers |
| Piston & Cylinder Group | Pistons, Wrist Pins, Liners, Ring Sets |
| Lubrication System | Oil Pump, Oil Cooler, Filter Elements |
| Overhaul Sealing | Full Gasket Kit, Crankshaft Seals, O-Rings |
A replacement rod installed without checking the crankshaft journal condition or oversize grade leads to premature bearing failure — the engine is back on the bench before the first service interval.
In Dubai, I have seen Kubota V3307 engines torn down twice because a standard-size connecting rod was fitted onto a crankshaft that had already been ground to 0.25 oversize during a previous rebuild. The oil clearance was excessive from day one, leading to knocking and spun bearings. This connecting rod for Kubota V3307 engine rebuild projects must always be matched to the actual measured journal diameter, not just the factory manual spec [NEED_CITE: engine rebuild clearance measurement standards]. The root cause of the original failure—often lubrication starvation or a blocked oil gallery—must be addressed, or the new rod will fail the same way.
The connecting rod does not work in isolation. It is part of a precision-matched rotating assembly where the rod, bearing shells, crankshaft journal, and piston pin bore must all align within tight tolerances. When sourcing a connecting rod for Kubota V3307 engine rebuild work, the first step is to verify the crankshaft regrind history. If the journals have been ground, the rod big-end and the bearing shells must match that oversize grade. Ordering a full matched set—rods, bearings, and pistons—from a single account ensures all components are dimensionally consistent and eliminates the risk of mixing grades from different suppliers.
The Kubota V3307 family includes naturally aspirated, turbocharged, common-rail, and Tier 4 variants. Internal dimensions, piston crown profiles, and rod bolt specifications can differ between these builds. A V3307-DI-TE3 may require different gasket thicknesses and seal profiles compared to a V3307-CR-TE4. Before confirming the order, provide the full engine serial number and any previous rebuild records. This allows verification of the specific variant and ensures the overhaul gasket kit contents match the exact engine build, avoiding the common problem of missing seals mid-assembly [NEED_CITE: Kubota V3307 engine serial variant identification].
The 4340 forged alloy steel construction provides the tensile strength needed for the high cylinder pressures encountered in excavation and loading cycles. Shot peening introduces compressive residual stress on the rod surface, which improves fatigue resistance under repeated loading. The dowel-pin big-end registration ensures the rod cap aligns precisely during assembly, preventing the cap shift that causes uneven bearing wear. Surface finish on the bearing journal is held to Ra ≤ 0.4 μm, which supports stable oil film formation and extends bearing shell service life.
Fitting a standard connecting rod onto a reground crankshaft creates excessive oil clearance, resulting in low oil pressure, rod knock, and bearing shell failure within hours of operation. Conversely, fitting an oversize rod onto a standard crankshaft causes binding and rapid heat buildup. Both scenarios mean the engine is pulled apart again, labor costs double, and the machine remains off-site. When the original rod failed due to an oil pump issue or blocked passage, replacing the rod alone without addressing the lubrication fault simply schedules the next breakdown [NEED_CITE: common root causes of connecting rod failure in diesel engines].
Our own production lines and qualified sourced supply operate under a single quality system and one warranty, so a connecting rod for Kubota V3307 engine rebuild and its companion bearings ship with consistent QC documentation. Eight core categories mean a full overhaul list—rods, pistons, bearings, gaskets, and seals—consolidates into one consignment under one account. Minimum order is one piece, supporting emergency single-cylinder repairs. Part identification works from the engine serial number, a photograph of the nameplate, or an image of the old part. Cross-reference verification covers superseded and alternate numbers, and sample supply is available for fitment confirmation before any bulk commitment. The technical team confirms oversize grade and variant compatibility before the order is finalized.
To receive an accurate quotation and confirm compatibility, provide the full Kubota engine model and serial number, the measured crankshaft journal diameters if the crankshaft has been reground, and a summary of any previous rebuild work. This information allows the technical team to verify the correct oversize grade and cross-check the overhaul kit contents against your specific V3307 variant.
Q: What grade of connecting rod and bearing shells does my rebuilt V3307 need? A: The required grade depends on the actual measured diameter of your crankshaft journals after any regrinding. Provide the micrometer readings or the regrind history, and the correct STD, 0.25, or 0.50 oversize connecting rod and matched bearing shells will be supplied together.
Q: Does the overhaul gasket kit include all seals for my V3307-DI-TE3 variant? A: Gasket kit contents vary between V3307 variants. When the full engine serial number is provided, the kit contents are cross-checked against the specific build to ensure all required seals, O-rings, and gaskets are included for a complete reassembly.
Q: How do I know if the crankshaft needs regrinding before fitting new rods? A: Measure each crankshaft journal with a micrometer and compare the readings against the factory standard and oversize specifications. If any journal is scored, out of round, or below the minimum standard diameter, regrinding to the next oversize is required.
Q: Can I order a matched set of rods, pistons, and bearings for a full rebuild? A: Yes. A complete matched set of connecting rods, pistons, wrist pins, bearing shells, and overhaul gaskets can be consolidated into a single shipment, ensuring all components are dimensionally compatible and arrive together.
Q: What caused the original connecting rod to fail — should I check the oil pump too? A: Connecting rod failures often stem from lubrication starvation caused by a failing oil pump, blocked oil gallery, or excessive bearing clearance. Inspecting the entire lubrication system before reassembly prevents repeat failures after the rebuild is complete.
<p>Oversize and undersize grades confirmed against crankshaft measurement before matched set dispatch.</p>
View Details<p><strong>16851-22140 Connecting Rod Bolt, ISO 898-1 Grade 10.9</strong> — replacement for Kubota D722 engine bottom-end rebuilds, SCM435 alloy steel heat-treated to 32–36 HRC with zinc-nickel plating.</p> <ul> <li>Part of the D722 rotating assembly; always replace as a matched set alongside con rod bearings and overhaul gaskets to prevent repeat teardowns.</li> <li>Bolt failure often traces to oil gallery starvation — inspect lubrication paths before reassembly.</li> <li>Fits B-series tractors, BX/ZD/RTV lines, KX and U-series excavators (cross-reference 1685122140, 16851-2214-0).</li> </ul> <p>Overhaul kit contents verified item-by-item before dispatch to ensure matched-grade fasteners ship complete.</p>
View Details<p><strong>31434307 Push Rod for Perkins 1004-40T</strong>, high-strength alloy steel, precision ground and heat-treated — part of the Perkins 1004-series valve train system where correct lift geometry depends on matching tappets, rocker arms, and valve stem seals to the engine serial variant. Bent rods often trace back to worn cam lobes or excessive valve clearance, so root-cause diagnosis before rebuild prevents repeat failure. Overhaul kit contents verified line-by-line against your engine build sheet to close gaps before shipment.</p> <ul> <li>Fits Perkins 1004-40T, 1004-40, 1004G, 1104C-44, 1106C-E60TA; CASE 321D, CX80, CX90; Landini Powerfarm, Rex, Trekker; Kobelco 700, 800, 900</li> <li>OEM cross-reference: 795728R1, 131434307, 505089</li> <li>MOQ 1 piece, 3–12 months warranty</li> </ul>
View Details<p><strong>Rocker Lever 4059353</strong> — replacement for Cummins X15 and ISX engines, high-strength alloy steel construction.</p> <ul> <li>Part of the valve train system; correct dimensional tolerances must match camshaft and valve interface specifications</li> <li>Engine serial verification is essential — X15 and ISX families carry internal variant differences across production runs</li> <li>Inspect push rods, tappets, and associated bearings as a matched set to prevent repeat failures from undiagnosed root causes</li> <li>Premature wear often traces to lubrication faults or improper valve clearance rather than the lever alone</li> </ul> <p>Overhaul kit contents verified item-by-item against your specific engine build before dispatch.</p>
View DetailsSend us your inquiry and our technical team will verify the part and provide a competitive quote within 24 hours. MOQ starts from 1 piece.
Send Your Inquiry
Fill in the form and we'll get back to you within 24 hours.
