Turbocharger & Kit
10,000+ SKUs across 8 categories. CAT · Komatsu · Hitachi · Volvo · Hyundai and more. MOQ 1 piece.
Turbocharger & Kit
134 items
Emission & Exhaust System
Cummins 6BT-Compatible H1C Turbocharger – Matched Set
<p><strong>H1C Turbocharger (cross-reference 3802289) for Cummins 6BT, 6BT-590, 6T-590 engines</strong> — compatible with 1994–2009 builds, delivering 1.2–1.8 bar boost and verified dynamic balance ≤2.5 g·mm. Part of the intake and boost system; matched gaskets, oil supply fittings, and air-side seals available for a complete refresh during engine overhaul. Addresses root-cause failure modes including oil contamination and restricted drain paths.</p> <ul> <li>Engine serial variant confirmation ensures correct turbo flange, oil port orientation, and wastegate calibration</li> <li>Overhaul kit contents verified line-by-line against 6BT build record before dispatch 11204</li> </ul>
Emission & Exhaust System
Turbo 7000677 7020831 Replacement for Kubota V2607 Overhaul Component
<p><strong>RHF3H Turbocharger 7000677 / 7020831</strong> (cross-reference), replacement for Kubota V2607-DI / V2607T engines in Bobcat S160–S590 and T180–T590 skid steers. Inconel 718 turbine wheel, Viton seals rated to +220°C, journal bearing clearance 0.045–0.055 mm.</p> <ul> <li>Supplied as part of a matched engine-system rebuild — pair with exhaust flange gaskets, oil return O-rings, and intake boot clamps to address the root cause of turbo failure rather than swapping the unit alone</li> <li>Overhaul gasket and seal list verified item-by-item against your specific V2607 engine build before dispatch</li> </ul>
Emission & Exhaust System
Turbocharger 482-8480 | Engine Grade for CAT C3.8 Loaders
<p><strong>Turbocharger 482-8480</strong> for CAT C3.8 engine rebuild, Ni-resist D5S ductile iron housing, 750°C max operating temperature — integrates with the C3.8 lubrication and cooling circuits where oil feed line condition and exhaust manifold backpressure directly affect turbine longevity. Matched gaskets, seal kits, and air intake components ship together so the complete intake/exhaust system is addressed in one overhaul cycle. Rotor dynamically balanced to G1.0 with clearance held at 0.08–0.12 mm.</p> <ul> <li>Overhaul kit contents verified item-by-item against your C3.8 engine serial variant before dispatch</li> </ul>
Emission & Exhaust System
HT60 Turbocharger 3804566 for Cummins N14 – System-Matched
<p><strong>HT60 Turbocharger 3804566</strong> for Cummins N14 engine intake system — fits Komatsu PC600-6, PC650-6 series excavators, dual ceramic ball bearing design.</p> <ul> <li>Part of the N14 forced induction system; matched to intake/exhaust manifolds and oil supply/return line gaskets</li> <li>Verify turbo flange and oil port configuration against engine serial number, as N14 production variants differ</li> <li>Cross-reference: 380456600, 3804566NX, 3536804, 4033556H (cross-reference only)</li> </ul> <p>Overhaul kit sealing contents verified item-by-item before dispatch to prevent incomplete rebuild sets.</p>
Emission & Exhaust System
HX35W Turbocharger for Cummins QSB6.7 – Engine Grade
<p><strong>4955156 HX35W Turbocharger for Cummins QSB6.7 Tier-3 engines</strong> — compatible with QSB6.7 and QSB Tier-3 builds, featuring forged steel turbine shaft and dual ceramic ball bearings for sustained operation above 150,000 rpm.</p> <ul> <li>Operates within the intake and emission system; matched oil inlet/outlet gaskets, heat shields, and intake seals should ship together to address root-cause faults like oil starvation or EGR stress</li> <li>Confirmed variant fitment for your engine serial and tier certification before dispatch, with full inspection records covering boost pressure and run-in testing included</li> </ul>
Emission & Exhaust System
Engine Grade TD04HL Turbocharger for CAT 3044C & Mitsubishi S4S
<p><strong>TD04HL Turbocharger</strong> for CAT 3044C & Mitsubishi S4S engine rebuild — integrates within the intake boost and lubrication circuit, requiring oil feed line, drain gasket, and manifold seal inspection during installation. Matched turbo variants TD04HL-13G-8.5 and TD04HL-13G available based on engine serial configuration.</p> <ul> <li>Compatible with CAT 236B, 257B3, 262C, 272C, 289C2 and 25+ additional skid steer loader models</li> <li>Cross-reference interchange: 234-4894, 49189-02711, 314-9972 (reference only)</li> <li>ISO 9001 certified aftermarket unit with dynamic balance and boost pressure verification</li> </ul> <p>Overhaul gasket contents and turbo mounting seals confirmed against your specific engine build record before dispatch.</p>
Emission & Exhaust System
Turbocharger HX40 for Cummins 6BTA 5.9 – Engine Grade
<p><strong>3536620 Turbocharger HX40</strong> for Cummins 6BTA 5.9 / 6BTAM engines — Ni-Resist D5S turbine housing, 2618 aluminum compressor wheel, dynamic balanced to G0.4.</p> <ul> <li>Designed as a system-level replacement within the intake and exhaust circuit; matched turbine housing gaskets, oil feed and return lines, and exhaust manifold fasteners ship together to support a complete rebuild sequence</li> <li>Engine serial variant verification ensures correct turbo calibration for marine 6BTAM versus industrial 6BTA 5.9 builds, with cross-reference interchange numbers 3536621, 3802829, and 4089816 confirmed for fitment</li> </ul> <p>Overhaul gasket kit contents verified item-by-item against your engine build record before dispatch.</p>
Emission & Exhaust System
Turbocharger 1J716-17010 | Matched Set for Kubota SVL65-2/SVL65-2C
<p><strong>Turbocharger 1J716-17010 for Kubota V2203-M-E4 Platform, Ni-Resist D5S Turbine Housing</strong> — replacement for Kubota SVL65-2 and SVL65-2C compact track loaders.</p> <ul> <li>Belongs to the intake and emission system; address oil feed line coking, intercooler carbon buildup, and piston ring condition in the same repair cycle to prevent repeat failure</li> <li>Flange bolt pattern held to ±0.05 mm tolerance, matched to engine serial-specific exhaust manifold variants</li> <li>Compressor wheel balanced to G2.5 per ISO 1940-1, turbine shaft runout within ±0.02 mm</li> </ul> <p>Overhaul gasket and seal kit contents verified line-by-line before dispatch.</p>
Emission & Exhaust System
System-Matched Turbo S1B 315666 – Fits Deutz BF3L914 BF4M1011F
<p><strong>Turbocharger S1B 315666 for Deutz BF3L914 & BF4M1011F</strong> — dual ceramic ball bearings, Ni-resist turbine housing, max 125,000 rpm.</p> <ul> <li>Sits within the intake and exhaust system where matched tolerances across pistons, bearings, and gasket sets prevent repeat turbo failure after rebuild</li> <li>Address root causes — oil coking, exhaust restriction, intake leaks — before fitting the replacement unit to protect your overhaul investment</li> </ul> <p>Oversize and standard grade options confirmed against your engine rebuild history before dispatch.</p>
Emission & Exhaust System
Cummins ISM M11-Compatible HX55 Turbocharger – Overhaul Component
<p><strong>HX55 Turbocharger for Cummins ISM/M11/B5.9 Engines</strong> — new aftermarket unit with 2618 aluminum compressor wheel (T6 heat-treated), Ni-Resist D5S turbine housing, and dual ceramic ball bearings at ABEC-5 tolerance.</p> <ul> <li>System-critical for intake/exhaust balance: correct turbo selection directly affects air-fuel ratio, EGT management, and aftertreatment longevity during rebuild.</li> <li>Validate engine serial and ECM calibration to confirm the right variant; inspect oil feed/return lines and intake manifold gaskets before installation.</li> <li>Cross-reference: 3590044, 3803938, 3536995, 4033813 (interchange reference only).</li> </ul> <p>Dimensional grades and matched tolerances confirmed against your engine rebuild history before shipment.</p>
Emission & Exhaust System
TD04L4 Turbocharger for Kubota V3307-DI – Engine Grade
<p><strong>1J774-17010 TD04L4 Turbocharger, 1.8 bar boost, forged aluminum compressor wheel</strong> — replacement for Kubota V3307-DI engines in SVL75-2 and SVL75-2C compact track loaders. This turbo belongs to the intake and exhaust system where upstream oil contamination or EGR coking often causes failure, so matched gaskets, oil feed lines, and air intake seals should ship together for a complete rebuild. Overhaul kit contents verified item by item before dispatch.</p> <ul> <li>Compatible with Mitsubishi turbo variants TD04L4-09T and TD04L4-09TK3-5.0</li> <li>Cross-reference: 1J774-17012, 1J774-17013, 49177-03250, 49177-03251</li> <li>MOQ 1 piece, ISO 9001 production</li> </ul>
Emission & Exhaust System
TD04L4 Turbocharger for Kubota V3307 & KX080-4S – System-Matched
<p><strong>TD04L4-09TK3-5.0 Turbocharger</strong> for Kubota V3307 engines, 7-blade forged compressor wheel, labyrinth-sealed shaft assembly. Fits KX080-4S, M7060HDC, SSV75 and compatible machines.</p> <ul> <li>System-matched to V3307 intake and EGR architecture — replacing this unit without inspecting oil feed lines, air filtration, and EGR cooler deposits risks repeat failure within hundreds of hours</li> <li>Stage3B and Tier 4 variants differ in mounting flange and oil return port layout; confirm engine serial before ordering to avoid mismatched gasket surfaces</li> </ul> <p>Cross-reference: 1J773-17013, 49177-03242 (interchange reference only).</p> <p>Overhaul kit contents verified item-by-item against your V3307 build record before dispatch.</p>