Kubota V2003/V2203/V2403 Cylinder Head with Valves & Springs

Kubota V2003/V2203/V2403 complete cylinder head with valves & springs

Get your Kubota V2003/V2203/V2403 engine back online fast—no more downtime waiting for OEM lead times or risking counterfeit parts. This Kubota cylinder head arrives fully assembled with precision-ground valves, matched valve springs, and factory-spec valve seats ready for direct bolt-on installation. <ul> <li>Eliminates guesswork: Pre-assembled with correct valve lash settings and hardened exhaust seat inserts—critical for high-temp durability on Tier 3 and CR engines</li> <li>Fits 50+ documented V2003/V2203/V2403 variants—including hard-to-source M-DI-TE2B-DW-1, V2203-M-E3B-TMS-1, and V2403-CR-TIE4BG-MLR1 configurations</li> <li>Backed by our 6-month warranty and verified against OEM torque specs, combustion chamber volume, and port flow profiles</li> <li>Ships same-day from Guangzhou warehouse—no minimum order, no wait for special builds</li> </ul>

Cylinder Components

Cummins B3.3 QSB3.3 overhaul rebuild kit with genuine gaskets & liners

Get your Cummins B3.3 or QSB3.3 back online faster — with zero guesswork on part compatibility or quality. This Cummins B3.3 rebuild kit delivers OEM-level reliability at a fraction of the cost, eliminating downtime caused by mismatched gaskets or undersized liners. <ul> <li>Includes semi-finished cylinder liners — critical for proper press-fit and bore alignment during honing (a must for maintaining correct piston-to-wall clearance)</li> <li>Full set: genuine-spec gaskets, main & con rod bearings, valves, guides, seats, pistons, pins, rings, and thrust washers — all pre-matched for B3.3/QSB3.3</li> <li>No more juggling multiple suppliers: one kit covers every major wear component in the short block and valvetrain</li> <li>Verified fit for both mechanical B3.3 and electronic QSB3.3 engines — no cross-reference headaches</li> </ul>

View Details

Cylinder Components

V3307 Engine Overhaul Kit with Crankshaft & 4 Rods for Kubota KX080-3/4

Get your Kubota KX080-3/4 or Bobcat S650 back online fast with full OEM-equivalent reliability — no more downtime waiting for slow OEM lead times or risking counterfeit rebuild kits. The V3307 engine overhaul kit includes a fully heat-treated alloy crankshaft and four precision-balanced connecting rods, ensuring proper journal alignment and eliminating premature bearing wear — a critical detail many suppliers overlook. <ul> <li>Fits V3307, V3307T, V3307-DI, and Tier 4-compliant variants (V3307-CR-TE4-SL2-Q)</li> <li>Complete standard-spec rebuild: liners, pistons, rings, valves, bearings, gaskets & bushings — all pre-matched</li> <li>Ready to ship from Guangzhou warehouse — 1-piece MOQ, 2–5 working day dispatch on in-stock orders</li> <li>Backed by 12-month warranty and technical verification support before you order</li> </ul>

View Details

Cylinder Components

Overhaul Gasket Kit for Shibaura N844L/N844LT – Engine Rebuild Sealing Solution

Stop engine leaks and restore compression reliably after your Shibaura N844L or N844LT rebuild — this Shibaura N844L gasket kit delivers OEM-equivalent sealing performance without the wait or markup. Built for real-world uptime, it eliminates guesswork and costly rework caused by mismatched or thin-gauge aftermarket seals. <ul> <li>Fits 2.2L Shibaura engines — verified for N844L/N844LT, plus New Holland L175/LS175/L218/L220, CASE SR160/SR175/SV185, and JCB TLT30 — all in one kit</li> <li>Includes critical multi-layer steel (MLS) cylinder head gaskets and precision-cut Viton® valve cover seals — not just generic rubber</li> <li>Every seal is pre-lubricated and dimensionally validated against factory specs to prevent warping during torque-up</li> <li>Ships same-day from our Guangzhou warehouse — no 3-week OEM delays or counterfeit risk</li> </ul>

View Details

Cylinder Components

Complete Cylinder Head with Valves & Springs for Kubota V2403 Engine

Get your Kubota V2403-powered equipment back online fast—no more downtime waiting for OEM delays or risking counterfeit parts that fail mid-shift. This Kubota V2403 cylinder head arrives fully assembled with valves, springs, and hardened valve seats pre-installed and pressure-tested, so you skip the labor-intensive setup and avoid mismatched components that cause compression leaks. <ul> <li>Fits 30+ engine variants—including CR, DI, TE2B, and T-E3B series—with precise OEM-spec machining on the deck surface (flatness tolerance ≤0.05mm)</li> <li>Direct replacement for 10 verified part numbers like 1G855-03042B and 1G916-03040B—no cross-referencing guesswork</li> <li>Ready to install on KX121/KX161 excavators, L-series tractors (L4200–L5740), R510/R520 loaders, and SQ/KJ generators</li> <li>Backed by XUNPO’s 6-month warranty and technical verification—send us your engine serial if unsure</li> </ul>

View Details

Kubota V2003/V2203/V2403 complete cylinder head with valves & springs

RELATED PARTS

Cummins B3.3 QSB3.3 overhaul rebuild kit with genuine gaskets & liners

V3307 Engine Overhaul Kit with Crankshaft & 4 Rods for Kubota KX080-3/4

Overhaul Gasket Kit for Shibaura N844L/N844LT – Engine Rebuild Sealing Solution

Complete Cylinder Head with Valves & Springs for Kubota V2403 Engine

INTERESTED IN
THIS PART?

Kubota V2003/V2203/V2403 complete cylinder head with valves & springs

RELATED PARTS

Cummins B3.3 QSB3.3 overhaul rebuild kit with genuine gaskets & liners

V3307 Engine Overhaul Kit with Crankshaft & 4 Rods for Kubota KX080-3/4

Overhaul Gasket Kit for Shibaura N844L/N844LT – Engine Rebuild Sealing Solution

Complete Cylinder Head with Valves & Springs for Kubota V2403 Engine

INTERESTED IN THIS PART?

INTERESTED IN
THIS PART?