D1105 Engine Serial Variant Verified — Multi-layer steel head gasket matched to Kubota D1105 cylinder sealing system, cross-referenced against E2B and EB suffix variants before dispatch.
Technical Specifications
| Parameter |
Value |
| Part Number |
1E010-03310 |
| Product Type |
Head Gasket |
| Cross-Reference |
1E010-03310, 1E010-03312, 1E01003310, 1E01003312, 1E03803310, 1E038-03310, 1G64303310, 1G643-03310 (reference only) |
| Machine Fitment |
Kubota KX41-2, KX61-2, B2400 series, RTV1100 series, ZD1211 series, LX2610 series, U25S, U27-4 |
| Engine Compatibility |
Kubota D1105, D1105-B-MOFFETT-1-S1, D1105-E2B series, D1105-EB-KOOI-1 |
| Material |
Multi-Layer Steel (MLS) |
| Temperature Range |
-40°C to 300°C |
| Pressure Rating |
20 bar |
| Condition |
New Aftermarket |
| Warranty |
3-12 months against manufacturing defects |
| Manufacturing Standard |
ISO 9001 |
Application Suitability
| Engine System |
Related Components |
| Cylinder head sealing assembly |
Valve cover gasket, thermostat housing gasket, cylinder head bolt set |
| Top-end overhaul system |
Valve stem seals, injector sleeve O-rings, intake and exhaust manifold gaskets |
| Coolant and compression sealing |
Coolant passage seals, combustion chamber sealing rings |
| E2B variant engine builds |
Variant-specific locating sleeves, matched head bolt torque sequence hardware |
Why the Same D1105 Head Gasket Ships in Multiple Variants
The D1105 cylinder head gasket engine rebuild requires matching the gasket to the exact engine suffix, not just the base engine family.
Rebuild shops frequently encounter a situation where the machine model is known — say a KX41-2 or RTV1100 — but the D1105 engine underneath carries an E2B, EB, or B-series suffix that changes internal porting and bolt geometry. Sending a gasket based on the machine model alone leads to misaligned coolant passages or combustion seal rings that sit on the wrong land [NEED_CITE: Kubota D1105 engine variant identification and serial number decoding]. In our Shandong facility, we have processed returns where the customer reported only the excavator model, and the head gasket shipped was dimensionally correct for a different D1105 variant — the bolt holes aligned, but the fire ring did not seal the cylinder bore correctly. This kind of mismatch does not show up until the engine is torqued, pressure-tested, and found leaking. The cost is not just the gasket; it is the labor of a second teardown, new head bolts, and a machine that sits idle for additional days.
Matching the Gasket to the D1105 Suffix and Serial Range
The Kubota D1105 family spans multiple industrial applications — from compact excavators like the KX41-2 and KX61-2 to utility vehicles like the RTV1100 and RTV-X1120 series, and zero-turn mowers in the ZD range. Each application can carry a different D1105 suffix: E2B variants appear in JLG, Skyjack, and Moffett equipment, while the EB series shows up in Kooi applications. The D1105 cylinder head gasket engine rebuild must account for these suffixes because they can indicate different deck heights, coolant passage layouts, or combustion chamber volumes. Confirming the engine serial number and suffix before ordering eliminates the most common source of top-end rebuild failure — a gasket that physically fits but does not seal the specific variant on the bench.
Oversize Components and Previous Rebuild History
When a D1105 has been through a previous overhaul, the block may have been bored to accept oversize pistons, and the deck surface may have been machined. The head gasket must match the current bore diameter and the reduced deck clearance that results from resurfacing. An STD gasket on an engine running 0.25 oversize pistons will leave the fire ring unsupported at the bore edge, leading to localized compression loss and eventual gasket burn-through [NEED_CITE: engine rebuild oversize component matching and deck clearance verification]. We verify the rebuild history — whether the engine is at STD, 0.25, or 0.50 oversize — before confirming the head gasket specification, so the D1105 cylinder head gasket engine rebuild addresses the engine as it exists today, not as it left the factory.
Multi-Layer Steel Construction and Thermal Cycling
The MLS construction of this head gasket is engineered for the D1105's specific head-to-block compression requirements. Multi-layer steel gaskets rely on the elastic deformation of their embossed sealing beads to maintain combustion pressure and coolant separation across repeated thermal cycles — from cold start at -40°C to sustained operating temperature near 300°C at the fire ring. The 20 bar pressure rating covers the D1105's peak cylinder pressure under load, but the gasket's long-term performance depends equally on correct torque sequencing of the head bolts and verified deck flatness within manufacturer tolerance. If the head or block surface is warped beyond specification, no gasket material will compensate; the root cause must be corrected before the D1105 cylinder head gasket engine rebuild is assembled.
The Hidden Cost of Skipping Adjacent Seals
A head gasket job that reuses the valve cover gasket, thermostat housing gasket, or head bolts often returns with a leak measured in weeks rather than years. Head bolts on the D1105 are torque-to-yield fasteners; once stretched during a previous installation, they cannot provide the clamping force the new MLS gasket requires [NEED_CITE: torque-to-yield head bolt reuse guidelines for diesel engines]. Similarly, valve stem seals that have hardened over thousands of hours will allow oil to migrate into the combustion chamber, creating carbon deposits that compromise the new head gasket's fire ring seal. The cost of replacing these adjacent components during the same teardown is marginal compared to the labor and downtime of a second disassembly.
Why Source This Rebuild Component Here
Our production and sourcing lines operate under a single warranty and a single quality standard, whether the D1105 cylinder head gasket engine rebuild component is produced in our own facility or sourced from a qualified ISO-certified partner. We stock across eight engine and machine categories, so a complete top-end overhaul kit — head gasket, valve stem seals, injector O-rings, thermostat gasket, and head bolt set — ships as one consignment from our Guangzhou warehouse. Minimum order is one piece, which matters when a single engine is on the bench waiting for a specific variant. Our technical team confirms engine serial suffix compatibility and cross-references superseded part numbers before dispatch, and we offer sample supply for fitment confirmation before you commit to bulk quantities for a fleet rebuild program.
Documentation & Verification
- Commercial invoice and packing list detailing each gasket and seal line item for customs and inventory matching.
- Part compatibility and cross-reference sheet listing 1E010-03310 interchange numbers marked as reference only.
- Dimensional quality inspection record confirming fire ring diameter, bolt hole alignment, and coolant port position.
- Warranty terms document specifying coverage period and manufacturing defect claim procedure.
- Packing photographs showing gasket packaging integrity and protective interleaving before carton closure.
- HS code and customs classification support for international shipment of engine sealing components.
Installation & Rebuild Sequence
- Verify D1105 block and head deck flatness with a precision straightedge before placing the MLS head gasket on the dowel pins.
- Install new head bolts and follow the Kubota-specified multi-stage torque sequence to achieve even clamping across all cylinders.
- Replace valve stem seals, injector sleeve O-rings, and thermostat gasket during the same teardown to prevent early return failures.
- After assembly, perform a cold pressure test and monitor for coolant or compression leakage during the initial thermal cycle and break-in run.
Confirm Your D1105 Variant Before Ordering
Provide the full engine serial number including the suffix (E2B, EB, B-series), the machine model it is installed in, and whether the block has been machined to oversize during a previous rebuild. This information allows us to verify the correct head gasket variant, confirm cross-reference compatibility, and assemble a matched top-end overhaul kit that ships together.
Frequently Asked Questions
Q: What other gaskets and seals should be replaced when doing a D1105 head gasket job?
A: A complete top-end overhaul should include the valve cover gasket, thermostat housing gasket, intake and exhaust manifold gaskets, valve stem seals, and injector sleeve O-rings. Reusing aged seals alongside a new head gasket introduces leak paths that undermine the rebuild. Head bolts should also be replaced if they are torque-to-yield fasteners, as they lose clamping force after one installation cycle.
Q: My D1105 has an E2B suffix — does that change which gasket I need?
A: Yes. The E2B suffix indicates a specific D1105 variant used in equipment from JLG, Skyjack, Moffett, and others. Internal differences in coolant passage layout or deck configuration can affect gasket fitment. Provide the full engine serial including suffix so we can cross-reference and confirm the correct head gasket before dispatch.
Q: The previous rebuild used oversize pistons — does the head gasket need to match?
A: It does. If the block has been bored to accept 0.25 or 0.50 oversize pistons, the head gasket fire ring must match the larger bore diameter. An STD gasket on an oversize bore leaves the fire ring unsupported at the cylinder edge, causing compression leakage and premature gasket failure under load.
Q: How do I confirm the correct part number when my engine plate is worn?
A: Send a photograph of whatever remains of the engine nameplate, the machine model, and any visible casting numbers on the block or head. We cross-reference these against our compatibility database, including superseded part numbers, to identify the correct D1105 variant and the gasket that matches it.
