Spark Plug and Wire Kit engine rebuild for Yanmar 3TNV70

Engine Grade Spark Plug and Wire Kit for Yanmar 3TNV70

BKR6EGP Spark Plug and Wire Kit, nickel-alloy electrodes with 8.5mm silicone-jacketed wires — matched ignition set for Yanmar 3TNV70 and compatible with John Deere GATOR XUV 825i, 835M, 845R models. <ul> <li>Tapered ground electrode geometry supports consistent flame kernel during rebuild</li> <li>Carbon-core wires rated 500 ohm/meter meet SAE J2030 EMI suppression</li> <li>Heat-shrink boots rated to 200°C prevent arcing at cylinder head temperatures</li> </ul> Rebuild shops verify wire routing and heat range against engine serial before ordering; this kit ships as a matched set for complete ignition system service. Oversize or prior head work may alter heat range requirements. Dimensions and resistance verified per batch; matched plug-and-wire sets dispatched together with test documentation included.

Cushion Damper

Matched Set Rubber Isolator Shock Mounts for Stanley Plate Compactors

TRSA000008038 Cushion Damper set, 4-piece matched rubber isolators — replacement for Stanley HS6000, HS6019, HS6100, HSX6, HS8000, HS11000, HSX11; also fits Bobcat PCF64 and Doosan vibratory plate compactors (cross-reference SW-180100 / SW180100). <ul> <li>Replacing a single cracked mount leaves uneven load distribution; this matched set restores uniform damping across the engine-to-chassis isolation plane to prevent secondary bearing and linkage wear.</li> <li>Natural rubber compound at 65±3 Shore A with anti-ozone stabilizers handles sustained high-cycle vibration without hardening.</li> </ul> Matched sets ship together with hardness batch records to keep your compactor rebuild consistent.

View Details

Engine Auxiliary Components

12V Stop Solenoid P610-B1V12 | Engine Grade for Engine Rebuild

P610-B1V12 Stop Solenoid, 12V DC Pull-Type Fuel Shutoff — compatible with diesel engines in CAT, Komatsu, Hitachi, Volvo and other excavator, loader and bulldozer models. Part of the engine fuel cutoff subsystem; verify fuel rack travel, linkage pivot wear, and return spring tension during rebuild to ensure clean shutdown and restart. Dual-spring return system rated for 100,000+ cycles with ±0.05 mm dimensional tolerance. <ul> <li>Dimensional and electrical cross-reference verified against engine serial variants</li> <li>Overhaul kit contents and matched components checked item by item before dispatch</li> </ul>

View Details

Engine Auxiliary Components

12V Fuel Shutoff Solenoid for Kubota D905–V1505T Engines – OEM Replacement

Stop unexpected engine shutdowns and get reliable, instant fuel cutoff every time — especially during critical operations or emergency stops. This 12V fuel shutoff solenoid for Kubota D905–V1505T engines delivers OEM-equivalent performance without the OEM wait times or markup. <ul> <li>Fits Kubota’s 05-series engines — including the notoriously tight-tolerance D905 and V1505T — with precise 12V pull-in and hold-in specs (12V/3.5A pull, 12V/1.2A hold) that prevent coil burnout under continuous duty</li> <li>Direct replacement for 17454-60010 and 12+ cross-references — no guesswork, no mismatched wiring harnesses</li> <li>Built with high-temp silicone seals and copper-clad steel armatures to withstand diesel heat cycles and vibration in B2400D, F2560, and other high-hour tractor applications</li> <li>Ships same-day from Guangzhou warehouse — no backorders, no counterfeit risk, and full technical verification before dispatch</li> </ul>

View Details

Engine Auxiliary Components

Glow Plug 1G679-65512 for Kubota Z602 V2403 – Fast Cold-Weather Start

Start your Kubota Z602 or V2403 engine reliably—even in sub-zero cold—without hesitation, cranking delays, or frustrating no-start mornings. This kubota glow plug delivers precise thermal output and faster preheat cycles thanks to its optimized 11V/120W ceramic heating element, a critical spec that ensures consistent cylinder temperature rise across multi-cylinder diesel combustion chambers. <ul> <li>Direct-fit replacement for part number 1G679-65512 (also listed as 1G67965512)</li> <li>Covers high-demand models: BX2370, RTV1140CPX, KX71, U25, ZD221—and all Z602/V2403-powered equipment</li> <li>Eliminates cold-start misfires and white smoke on startup—common with worn or low-resistance plugs</li> <li>ISO-certified manufacturing with batch-tested resistance tolerance ≤±3%, ensuring matched performance across all 4 plugs in a set</li> </ul>

View Details

Engine Grade Spark Plug and Wire Kit for Yanmar 3TNV70

Shipping Policy

Warranty & Quality

RELATED PARTS

Matched Set Rubber Isolator Shock Mounts for Stanley Plate Compactors

12V Stop Solenoid P610-B1V12 | Engine Grade for Engine Rebuild

12V Fuel Shutoff Solenoid for Kubota D905–V1505T Engines – OEM Replacement

Glow Plug 1G679-65512 for Kubota Z602 V2403 – Fast Cold-Weather Start

INTERESTED IN
THIS PART?

Engine Grade Spark Plug and Wire Kit for Yanmar 3TNV70

Shipping Policy

Warranty & Quality

RELATED PARTS

Matched Set Rubber Isolator Shock Mounts for Stanley Plate Compactors

12V Stop Solenoid P610-B1V12 | Engine Grade for Engine Rebuild

12V Fuel Shutoff Solenoid for Kubota D905–V1505T Engines – OEM Replacement

Glow Plug 1G679-65512 for Kubota Z602 V2403 – Fast Cold-Weather Start

INTERESTED IN THIS PART?

INTERESTED IN
THIS PART?