Matched Sets Shipped — Fuel cutoff system parts consolidated with the 12V stop solenoid 3991167 SA-4941-12 so the 4BT rebuild bench never waits on a missing relay or seal.
Technical Specifications
| Parameter |
Value |
| Part Number |
3991167 SA-4941-12 |
| Product Type |
Stop Solenoid |
| Cross-Reference |
3991167, SA-4941-12, SA494112, 3964627 (for identification purposes) |
| Machine Fitment |
R130 Excavator, R170 Excavator, 4BT Engine |
| Brand Compatibility |
Cummins, Hyundai |
| Voltage |
12V |
| Condition |
New Aftermarket |
| Warranty |
3-12 months against manufacturing defects |
| Manufacturing Standard |
ISO-certified facilities |
Application Suitability
| Engine System |
Related Components |
| Fuel cutoff and safety shutdown |
Fuel rack linkage, shutoff lever return spring |
| Electrical shutdown circuit |
Wiring harness connectors, shutdown relay, fuse block |
| Cummins 4BT overhaul |
Fuel system gaskets, injector seals, governor components |
| Hyundai R130 / R170 engine service |
Engine harness pigtail, mounting fasteners |
Why the Shutdown Circuit Fails Again Weeks After a New 12V Stop Solenoid Engine Replacement
The solenoid burned out because the relay stuck or the harness terminal corroded — swapping only the solenoid leaves the root cause on the bench.
In Latin American mining sites, I pulled Cummins 4BT engines for rebuild and found stop solenoids replaced twice in one quarter. The wiring harness pin had spread from vibration, dropping voltage below engagement threshold. The 12V stop solenoid engine unit took the blame while the circuit kept killing it. [NEED_CITE: electrical circuit diagnostic procedures for diesel engine shutdown systems] Rebuild shops that skip the relay and harness check end up warrantying a part that was never the problem.
Where the Stop Solenoid Sits in the 4BT Fuel System
The 3991167 stop solenoid controls fuel rack position during shutdown events on the Cummins 4BT platform. When energized at 12V, the plunger holds the rack open for normal operation; de-energizing lets the return spring snap the rack closed and kill fuel delivery. This makes the 3991167 stop solenoid rebuild item part of a system that includes the governor linkage, return spring, and shutdown relay — not an isolated electrical component.
Engine Serial Variants That Change the Fitment
Cummins 4BT engines were produced across multiple serial ranges with different solenoid mounting configurations and plunger stroke lengths. A solenoid that physically bolts on may still leave the fuel rack partially engaged, causing a slow shutdown or a no-start condition. Verifying engine serial number against the plunger specification prevents this mismatch. [NEED_CITE: Cummins 4BT engine serial number variant identification] The cross-reference numbers 3991167, SA-4941-12, and 3964627 each appear in different parts catalogs, and only serial-confirmed matching eliminates the risk.
Reading the Specs That Matter on the Bench
The 12V rating means this solenoid expects stable system voltage — anything below nominal causes sluggish plunger travel and incomplete fuel rack engagement. The ISO-certified manufacturing ensures coil winding consistency and plunger surface finish within tolerance, both of which affect heat generation during extended energization. New aftermarket condition means zero coil degradation from prior thermal cycling. On Hyundai R130 and R170 excavators where the alternator output can fluctuate under heavy hydraulic load, verifying that the 12V stop solenoid engine unit receives clean voltage matters more than the coil resistance reading alone. [NEED_CITE: voltage stability requirements for diesel engine electrical actuators]
The Real Cost of Skipping the Shutdown Circuit Inspection
Replacing only the stop solenoid without checking the relay contacts and harness terminals leads to repeat failure, sometimes within weeks. A second teardown on a Cummins 4BT means pulling the valve cover, disturbing the injector lines, and re-bleeding the fuel system — all because the first repair addressed the symptom. Shops that miss this sequence lose credibility with fleet operators who track repeat failures. [NEED_CITE: diesel engine repeat failure root cause analysis methodology]
Why Source This 12V Stop Solenoid Engine Component Through Our Engine System Desk
Self-produced and sourced lines carry the same warranty terms, so the stop solenoid and its matched fuel system gaskets ship under one account. Eight categories mean the wiring connectors, relay, and mounting hardware arrive in one consignment, not three separate deliveries. Guangzhou warehouse stock covers common 4BT shutdown components for fast dispatch. Part identification works from engine serial number, nameplate photo, or worn label image. Cross-reference verification covers the superseded 3964627 number alongside 3991167 and SA-4941-12. Technical staff confirm plunger stroke variant before the order is placed.
Documentation & Verification
- Commercial invoice listing 3991167 SA-4941-12 with cross-reference notation
- Compatibility sheet mapping engine serial range to plunger variant
- Quality inspection record with coil resistance and plunger travel check
- Warranty terms covering manufacturing defects for 3 to 12 months
- Packing photographs showing solenoid and matched gasket sets
- HS code and customs documentation for international shipment
Installation & Rebuild Sequence
- Verify wiring harness terminal condition and relay contacts before fitting the new stop solenoid
- Confirm plunger stroke matches fuel rack travel on the specific 4BT serial variant
- Check 12V circuit voltage under cranking load to ensure adequate engagement force
- Test shutdown function with engine at idle before returning to service
Inquiry Guidance
Provide the Cummins 4BT engine serial number and any prior rebuild history so we confirm the correct plunger variant. If the nameplate is worn, send a photo of the mounting area and existing connector — we identify from images. For overhaul planning, share the full engine service list so matched fuel system seals and electrical components ship together.
Frequently Asked Questions
Q: What other engine system components should I inspect or replace when the stop solenoid fails?
A: Check the shutdown relay contacts for pitting, inspect wiring harness terminals for spread or corrosion, and verify the fuel rack return spring tension. On Cummins 4BT engines, the governor linkage pivot points also wear and can bind the rack. We supply matched gaskets, connectors, and relays in the same consignment so the entire shutdown circuit is addressed at once.
Q: Does the Cummins 4BT engine serial number affect which stop solenoid variant I need?
A: Yes. Different serial ranges use solenoids with varying plunger stroke lengths and mounting flange configurations. A physically compatible unit may still leave the fuel rack partially open. Provide your engine serial number so we cross-check plunger specification against your exact build and avoid a no-start or slow-shutdown condition on the bench.
Q: How do I confirm whether the failure is the solenoid itself or a wiring and relay issue?
A: Measure voltage at the solenoid connector during cranking — a significant drop from system voltage points to harness resistance or relay contact degradation. Check relay coil resistance and contact continuity separately. We can advise on diagnostic sequence based on your equipment model and the symptoms observed before failure.
Q: Can I order matched fuel system seals and electrical connectors with this solenoid in one shipment?
A: Yes. Fuel system gaskets, injector seals, wiring harness pigtails, and mounting fasteners are all available under one account with the same warranty terms. Consolidating the shutdown circuit service into a single consignment eliminates split freight costs and prevents the bench from waiting on a delayed second delivery.
